3 open source boards using the ATMEGA16U2-AU

Real designs built with the ATMEGA16U2-AU, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The ATMEGA16U2-AU in open source designs

The gallery holds 3 open source boards using the ATMEGA16U2-AU from 2 GitHub repositories; a typical one measures about 99.1 × 56 mm and carries around 76 components.

100% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.

The most starred is 4-layer panel by bfrigon.

Microcontrollers on boards using the ATMEGA16U2-AU

What boards using the ATMEGA16U2-AU are built for

ATMEGA16U2-AU: common questions

Where can I find a ATMEGA16U2-AU reference design?

Each of the 3 boards on this page is a real design using the ATMEGA16U2-AU. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the ATMEGA16U2-AU use?

Most are built on AVR/Arduino (3).

How big is a typical board using the ATMEGA16U2-AU?

The median is 99.1 × 56 mm, and 100% are two-layer designs.

What is the most popular open source board using the ATMEGA16U2-AU?

By GitHub stars, 4-layer panel by bfrigon, with 18 stars.

Can I simulate one of these boards using the ATMEGA16U2-AU before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part