2 open source boards using the 74AHCT1G126SE-7
Real designs built with the 74AHCT1G126SE-7, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Raspberry Pi
Pintry
icamaster
100 × 100 mm166 parts4LMIT26NXP
Colordance brain
ademuri
129.5 × 83.5 mm131 parts2LApache-2.04
The 74AHCT1G126SE-7 in open source designs
The gallery holds 2 open source boards using the 74AHCT1G126SE-7 from 2 GitHub repositories; a typical one measures about 114.8 × 91.8 mm and carries around 149 components.
50% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Pintry by icamaster.
Microcontrollers on boards using the 74AHCT1G126SE-7
74AHCT1G126SE-7: common questions
Where can I find a 74AHCT1G126SE-7 reference design?
Each of the 2 boards on this page is a real design using the 74AHCT1G126SE-7. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the 74AHCT1G126SE-7 use?
Most are built on NXP (1) and Raspberry Pi (1).
How big is a typical board using the 74AHCT1G126SE-7?
The median is 114.8 × 91.8 mm, and 50% are two-layer designs.
What is the most popular open source board using the 74AHCT1G126SE-7?
By GitHub stars, Pintry by icamaster, with 26 stars.
Can I simulate one of these boards using the 74AHCT1G126SE-7 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.