TheBetterWakelight

tomsmilton·TheBetterWakelight·v2-better-wakelight/hardware/pcb/wakelight.kicad_pcb

TheBetterWakelight PCB layout, top view — open source ESP32 board by tomsmilton

About the TheBetterWakelight PCB

TheBetterWakelight is an open source ESP32 PCB design by tomsmilton, published on GitHub. It is a 2-layer board measuring 66 × 42 mm, with 31 components from 21 distinct parts.

Its main chip is the ESP32-WROOM-32E-N8, from the ESP32 family. Other key parts include the CH340C, AMS1117-3.3 and THVD1410DR. By type, the board carries 11 resistors, 8 capacitors, 4 ICs, 2 transistors, 2 connectors and 2 switches.

From the project

A small ESP32 board that plugs into a Neewer PL60C LED panel's 5-pin DMX‑IN and ramps it from black to full daylight before your alarm — a sunrise lamp you configure from a phone-friendly web page on your home Wi‑Fi.

A small ESP32 board that plugs into a Neewer PL60C LED panel's 5-pin DMX‑IN and ramps it from black to full daylight before your alarm — a sunrise lamp you configure from a phone-friendly web page on your home Wi‑Fi.

The custom PCB — XLR variant (v1.1), board-mount Neutrik 5-pin XLR:

Open http://wakelight.local in any browser on the same Wi‑Fi — phone or desktop. The header chip shows whether changes have reached the lamp (Saving… → Saved), and tapping the lamp name lists every WakeLight on your network.

TheBetterWakelight, from the project README
From the project README

Main components on the TheBetterWakelight

TheBetterWakelight bill of materials (BOM)

31 components, 21 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-WROOM-32E-N8
U1
1
CH340C
U2
1
AMS1117-3.3
U3
1
THVD1410DR
U4
2
SS8050
Q1, Q2
1
C165948
USB-C 16P
J1
1
NC5FAH DMX OUT
J2
1
C318884
EN
SW1
1
C318884
BOOT
SW2
1
C2286
PWR red
D1
1
C2288
ST blue
D2
1
C15850
10uF
C1
2
C45783
22uF
C2, C4
3
C14663
100nF
C3, C5, C7
1
C15849
1uF
C6
1
C1779
4.7uF
C8
2
C23186
5k1
R1, R2
4
C25804
10k
R3, R4, R5, R8
2
C21190
1k
R6, R7
2
C23228
680R
R9, R10
Show 1 more
QtyPartRefs
1
120R DNP
R11

TheBetterWakelight design files

The KiCad project lives in the tomsmilton/TheBetterWakelight repository on GitHub; these links point at the commit this page was built from.

TheBetterWakelight: common questions

What microcontroller does the TheBetterWakelight use?

The TheBetterWakelight is built around the ESP32-WROOM-32E-N8, from the ESP32 family.

How big is the TheBetterWakelight PCB?

The TheBetterWakelight measures 66 × 42 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the TheBetterWakelight?

31 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the TheBetterWakelight design files?

From the tomsmilton/TheBetterWakelight repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the TheBetterWakelight design in my own project?

The repository has no license, so all rights stay with tomsmilton. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the TheBetterWakelight without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards