Ds1486 rp2350
tomverbeure·ds1486·ds1486_rp2350/ds1486_rp2350.kicad_pcb
About the Ds1486 rp2350 PCB
Ds1486 rp2350 is an open source RP2040/RP2350 PCB design by tomverbeure, published on GitHub. It is a 4-layer board measuring 30.4 × 45.9 mm, with 54 components from 29 distinct parts.
Its main chip is the RP2350_60QFN, from the RP2040/RP2350 family. Other key parts include the SN74LVC8T245, SN74LVC1G00DRL, YSN8010SJ, W25Q128JVS and NCP1117-3.3_SOT223. By type, the board carries 23 capacitors, 10 resistors, 7 ICs, 6 connectors, 4 diodes and 1 crystal.
From the project
ds1486
Main components on the Ds1486 rp2350
Ds1486 rp2350 bill of materials (BOM)
54 components, 29 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SN74LVC8T245 | SSOP-24_3.9x8.7mm_P0.635mm | U4 |
| 2 | SN74LVC1G00DRL | Texas_R-PDSO-N5_DRL-5 | U5, U7 |
| 1 | YSN8010SJ | SOP-8_3.9x4.9mm_P1.27mm | U6 |
| 1 | W25Q128JVS | SOIC-8_5.23x5.23mm_P1.27mm | U8 |
| 1 | NCP1117-3.3_SOT223 | SOT-223-3_TabPin2 | U9 |
| 1 | RP2350_60QFN | QFN-60-1EP_7x7mm_P0.4mm_EP3.4x3.4mm | U10 |
| 1 | ABM8-272-T3 | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | DBG1-16 | PinHeader_1x16_P2.54mm_Vertical | J2 |
| 1 | DBG17-32 | PinHeader_1x16_P2.54mm_Vertical | J3 |
| 1 | DS1-16 | PinHeader_1x16_P2.54mm_Vertical_DIP_Diameter_Flipside | J4 |
| 1 | DS17-32 | PinHeader_1x16_P2.54mm_Vertical_DIP_Diameter_Flipside | J5 |
| 1 | USB_B_Micro | USB_Micro-B_Amphenol_10103594-0001LF_Horizontal | J6 |
| 1 | SM03B-SRSS-TB | JST_SH_SM03B-SRSS-TB_1x03-1MP_P1.00mm_Horizontal | J8 |
| 1 | CR1225 H2 | CR1225_H2 | BT1 |
| 1 | SW_Push | SW_Push_1P1T_NO_Vertical_Wuerth_434133025816 | SW1 |
| 4 | BZT52C6V8-7-F | D_SOD-123F | D1, D2, D3, D4 |
| 1 | 3.3u | L_pol_2016 | L1 |
| 3 | 100n | C_0603_1608Metric | C15, C16, C20 |
| 12 | 100n | C_0402_1005Metric | C18, C19, C24, C28, C31, C32, C33, C34 +4 |
| 2 | 10u | C_0805_2012Metric | C21, C25 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 15p | C_0402_1005Metric | C22, C23 |
| 2 | 4.7u | C_0402_1005Metric_small_pads | C26, C27 |
| 2 | 4.7u | C_0402_1005Metric | C29, C30 |
| 2 | 4k7 | R_0402_1005Metric | R37, R38 |
| 1 | 0 | R_0402_1005Metric | R42 |
| 1 | DNF | R_0402_1005Metric | R43 |
| 3 | 1k | R_0402_1005Metric | R44, R45, R47 |
| 1 | 33 | R_0402_1005Metric | R46 |
| 2 | 27 | R_0402_1005Metric | R48, R49 |
Ds1486 rp2350 design files
The KiCad project lives in the tomverbeure/ds1486 repository on GitHub; these links point at the commit this page was built from.
Ds1486 rp2350: common questions
What microcontroller does the Ds1486 rp2350 use?
The Ds1486 rp2350 is built around the RP2350_60QFN, from the RP2040/RP2350 family.
How big is the Ds1486 rp2350 PCB?
The Ds1486 rp2350 measures 30.4 × 45.9 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Ds1486 rp2350?
54 components, from 29 distinct parts. The full bill of materials is listed on this page.
Where can I download the Ds1486 rp2350 design files?
From the tomverbeure/ds1486 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Ds1486 rp2350 design in my own project?
The repository has no license, so all rights stay with tomverbeure. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Ds1486 rp2350 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
More boards in ds1486
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k