Board Production 1
Tony4tuna·Board_Production_1
About the Board Production 1
Board Production 1 is an open source ESP32 PCB design by Tony4tuna, published on GitHub. It is a 2-layer board measuring 116.3 × 104 mm, with 38 components from 21 distinct parts.
Its main chip is the ESP32-WROOM-32E, from the ESP32 family. Other key parts include the MCP23017_Breakout_Module, ULN2803A and MAX3485. By type, the board carries 14 connectors, 11 capacitors, 7 resistors and 5 ICs.
From the project
Board_Production_1
- Quote/production ZIP: FinalPacis5.0PRODUCTIONGerbers.zip - Expanded Gerbers and drill files: ProductionGerbersFinalPacis50/ - DRC report: FinalPacis5.0DRCREPORT.txt`
- Project: FinalPacis5.0.kicadpro - Schematic: FinalPacis5.0.kicadsch - PCB: FinalPacis5.0.kicadpcb - Project footprint library: PacisProject.pretty/
Last production check: routed board with 0 unconnected pads and 0 schematic parity issues.
Main components on the Board Production 1
Board Production 1 bill of materials (BOM)
38 components, 21 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP23017_Breakout_Module | MCP23017_Breakout_Module | U1 |
| 2 | ULN2803A | DIP-18_W7.62mm_LongPads | U2, U3 |
| 1 | MAX3485 | MAX3485_RS485_Breakout_19.3x13.3mm | U4 |
| 1 | ESP32-WROOM-32E | Inland_ESP32_DevBoard_38P_Version2 | U5 |
| 1 | Z1-L | TerminalBlock_MaiXu_MX126-5.0-03P_1x03_P5.00mm | J1 |
| 1 | Z2-L | TerminalBlock_MaiXu_MX126-5.0-03P_1x03_P5.00mm | J2 |
| 1 | Z3-L | TerminalBlock_MaiXu_MX126-5.0-03P_1x03_P5.00mm | J3 |
| 1 | Z4-L | TerminalBlock_MaiXu_MX126-5.0-03P_1x03_P5.00mm | J4 |
| 1 | Z5-L | TerminalBlock_MaiXu_MX126-5.0-03P_1x03_P5.00mm | J5 |
| 1 | W.N | TerminalBlock_MaiXu_MX126-5.0-03P_1x03_P5.00mm | J6 |
| 1 | Screw_Terminal_01x03 | TerminalBlock_MaiXu_MX126-5.0-03P_1x03_P5.00mm | J7 |
| 1 | Zone 1 | TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J8 |
| 1 | Zone 2 | TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J9 |
| 1 | Zone 3 | TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J10 |
| 1 | Zone 4 | TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J11 |
| 1 | Zone 5 | TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J12 |
| 1 | PTT | TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J13 |
| 1 | White Noise | TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J14 |
| 1 | A+ | TerminalBlock_MaiXu_MX126-5.0-03P_1x03_P5.00mm | B-1 |
| 11 | 104 | C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C2, C3, C4, C5, C6, C7, C8 +3 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 7 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R1, R2, R3, R4, R5, R6, R7 |
Board Production 1 design files
The KiCad project lives in the Tony4tuna/Board_Production_1 repository on GitHub; these links point at the commit this page was built from.
- LayoutFinal_Pacis_5.0.kicad_pcb
- SchematicFinal_Pacis_5.0.kicad_sch
Board Production 1: common questions
What microcontroller does the Board Production 1 use?
The Board Production 1 is built around the ESP32-WROOM-32E, from the ESP32 family.
How big is the Board Production 1?
The Board Production 1 measures 116.3 × 104 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Board Production 1?
38 components, from 21 distinct parts. The full bill of materials is listed on this page.
Where can I download the Board Production 1 design files?
From the Tony4tuna/Board_Production_1 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Board Production 1 design in my own project?
The repository has no license, so all rights stay with Tony4tuna. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Board Production 1 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k