Automated greenhouse
topnie·automated_greenhouse·kicad_schematics/greenhouse.kicad_sch

About the Automated greenhouse PCB
Automated greenhouse is an open source PCB design by topnie, published on GitHub. It is a board, with 22 components from 15 distinct parts.
Other key parts include the NUCLEO64-G431RB, XL4015, SG90, SN65HVD230_Board and Maker_Soil_Moisture. By type, the board carries 12 ICs, 4 resistors, 2 transistors, 2 connectors and 2 diodes.
It belongs with the sensors, robotics & motion and power & battery designs in this gallery.
From the project
Firmware and desktop software for a two-node STM32 greenhouse prototype system that can monitor environment conditions and autonomously control ventilation and plant watering.
Firmware and desktop software for a two-node STM32 greenhouse prototype system that can monitor environment conditions and autonomously control ventilation and plant watering.
The system samples the temperature and humidity inside and outside the greenhouse enclosure, compares them with user-configured targets, and commands servo-driven vents, a fan, and a water pump. The user can connect to the device using USB and use the desktop application to configure control parameters and see the plotted measurement history.
Main components on the Automated greenhouse
Automated greenhouse bill of materials (BOM)
22 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | NUCLEO64-G431RB | U1, U2 | |
| 1 | XL4015 | U3 | |
| 2 | SG90 | U4, U5 | |
| 2 | SN65HVD230_Board | U6, U7 | |
| 1 | Maker_Soil_Moisture | U8 | |
| 1 | BH1750 | U9 | |
| 1 | BME280_Board | U10 | |
| 1 | SHT31-F_Board | U11 | |
| 1 | PL2303_Board | U12 | |
| 2 | IRLB8721PBF | TO-220-3_Vertical | Q1, Q2 |
| 1 | Water_Pump | J1 | |
| 1 | DC_Fan | J2 | |
| 2 | 1N5819 | D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2 |
| 2 | 750 | R1, R4 | |
| 2 | 10k | R2, R3 |
Automated greenhouse design files
The KiCad project lives in the topnie/automated_greenhouse repository on GitHub; these links point at the commit this page was built from.
Automated greenhouse: common questions
How many components are on the Automated greenhouse?
22 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the Automated greenhouse design files?
From the topnie/automated_greenhouse repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the Automated greenhouse design in my own project?
The repository has no license, so all rights stay with topnie. Use it as a reference, and ask the author before reusing the design.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kEinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k