Cheddar
tperale·cheddar·schematics/cheddar.kicad_pcb
About the Cheddar PCB
Cheddar is an open source PCB design by tperale, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 43 × 26 mm, with 23 components from 16 distinct parts.
Other key parts include the CH340G, MCP73831 and HT7333. By type, the board carries 9 capacitors, 7 resistors, 3 ICs, 1 transistor, 1 crystal and 1 connector.
It belongs with the rf & radio designs in this gallery.
From the project
:satellite: A ESP8266 connected button like the Amazon Dash but programmable
Main components on the Cheddar
Cheddar bill of materials (BOM)
23 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CH340G | SOIC-16_3.9x9.9mm_P1.27mm | U1 |
| 1 | MCP73831 | SOT-23-5_HandSoldering | U2 |
| 1 | HT7333 | SOT-89-3_Handsoldering | U4 |
| 1 | MOSFET_PCH | SOT-23_Handsoldering | Q1 |
| 1 | 12Mhz | CRYSTAL-SMD-3.2X2.5MM | Y1 |
| 1 | USB_OTG | USB_Micro-B-custom | J1 |
| 1 | GREEN | LED_1206_3216Metric | D1 |
| 2 | 100nF | C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C1, C6 |
| 1 | 10nF | C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C2 |
| 1 | 22nF | C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C3 |
| 2 | 22pF | C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C4, C5 |
| 1 | 1uF | C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C7 |
| 2 | 220uF | C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C8, C9 |
| 5 | 10k | R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R1, R2, R5, R6, R7 |
| 1 | 470 | R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R3 |
| 1 | 100k | R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R4 |
Cheddar design files
The KiCad project lives in the tperale/cheddar repository on GitHub; these links point at the commit this page was built from.
Cheddar: common questions
How big is the Cheddar PCB?
The Cheddar measures 43 × 26 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Cheddar?
23 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the Cheddar design files?
From the tperale/cheddar repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Cheddar design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which tperale chose for the repository.
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675Radioberry juice
pa3gsb
65 × 56 mm87 parts2LNo license675Radioberry preamp
pa3gsb
65 × 56 mm137 parts2LNo license675Goodwatch20
travisgoodspeed
25.6 × 27.6 mm20 parts2LNo license568GoodPocketWatch
travisgoodspeed
75.2 × 101.2 mm56 parts2LNo license568Goodwatch31
travisgoodspeed
25.6 × 27.6 mm23 parts2LNo license568