ESP DRONE 2

TR-JAYAVARDHAN-SINGH·Auto_Drone-with-esp32·Hardware/PCB/ESP_DRONE_2/ESP_DRONE_2.kicad_pcb

ESP DRONE 2 PCB layout, top view — open source ESP32 board by TR-JAYAVARDHAN-SINGH

About the ESP DRONE 2 PCB

ESP DRONE 2 is an open source ESP32 PCB design by TR-JAYAVARDHAN-SINGH, published on GitHub. It is a 2-layer board measuring 56.6 × 48.2 mm, with 32 components from 14 distinct parts.

Its main chip is the AO3401, from the ESP32 family. Other key parts include the ESP32-WROOM-32. By type, the board carries 8 connectors, 7 capacitors, 6 resistors, 5 diodes, 4 transformers and 2 ICs.

It belongs with the robotics & motion designs in this gallery.

Main components on the ESP DRONE 2

ESP DRONE 2 bill of materials (BOM)

32 components, 14 distinct parts.

QtyPartRefs
1
AO3401
U2
1
ESP32-WROOM-32
U8
1
Conn_01x03_Socket
J1
4
Conn_01x02_Female
J2, J4, J5, J6
1
Conn_01x02_Socket
J3
1
Conn_01x08_Socket
J7
1
Conn_01x06_Socket
J10
4
SI2302DS-T1
T1, T2, T3, T4
1
SS34
D1
4
1N4148W
D2, D3, D4, D5
1
10uf
C9
5
1uf
C10, C15, C16, C17, C18
1
0.1uf
C11
6
10k
R10, R11, R18, R19, R20, R21

ESP DRONE 2 design files

The KiCad project lives in the TR-JAYAVARDHAN-SINGH/Auto_Drone-with-esp32 repository on GitHub; these links point at the commit this page was built from.

ESP DRONE 2: common questions

What microcontroller does the ESP DRONE 2 use?

The ESP DRONE 2 is built around the AO3401, from the ESP32 family.

How big is the ESP DRONE 2 PCB?

The ESP DRONE 2 measures 56.6 × 48.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ESP DRONE 2?

32 components, from 14 distinct parts. The full bill of materials is listed on this page.

Where can I download the ESP DRONE 2 design files?

From the TR-JAYAVARDHAN-SINGH/Auto_Drone-with-esp32 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the ESP DRONE 2 design in my own project?

The repository has no license, so all rights stay with TR-JAYAVARDHAN-SINGH. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the ESP DRONE 2 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in Auto_Drone-with-esp32

Similar boards