ESP DRONE
TR-JAYAVARDHAN-SINGH·Auto_Drone-with-esp32·Hardware/PCB/ESP_DRONE/ESP_DRONE.kicad_pcb
About the ESP DRONE PCB
ESP DRONE is an open source ESP32 PCB design by TR-JAYAVARDHAN-SINGH, published on GitHub. It is a 2-layer board measuring 41.9 × 39.6 mm, with 42 components from 20 distinct parts.
Its main chip is the AO3401, from the ESP32 family. Other key parts include the 100K, MIC5219-3.3YM5 and ESP32-WROOM-32. By type, the board carries 11 capacitors, 8 connectors, 7 resistors, 6 ICs, 5 diodes and 4 transformers.
It belongs with the robotics & motion designs in this gallery.
Main components on the ESP DRONE
ESP DRONE bill of materials (BOM)
42 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 100K | R_0603_1608Metric | U1, U4, U5 |
| 1 | AO3401 | SOT-23 | U2 |
| 1 | MIC5219-3.3YM5 | SOT-23-5 | U3 |
| 1 | ESP32-WROOM-32 | ESP32-WROOM-32 | U8 |
| 1 | USB_C_Receptacle_USB2.0 | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 4 | Conn_01x02_Female | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J2, J4, J5, J6 |
| 1 | Conn_01x08_Socket | PinHeader_1x08_P2.54mm_Vertical | J3 |
| 2 | Conn_01x06_Female | PinHeader_1x06_P2.54mm_Vertical | J8, J9 |
| 4 | SI2302DS-T1 | SOT-23 | T1, T2, T3, T4 |
| 1 | POW_LED | LED_0603_1608Metric | LED1 |
| 1 | SS34 | D_SMA | D1 |
| 4 | 1N4148W | D_SOD-323 | D2, D3, D4, D5 |
| 2 | 10u | C_0603_1608Metric | C1, C4 |
| 1 | 470pF | C_0603_1608Metric | C2 |
| 1 | 2.2uF | C_0805_2012Metric | C3 |
| 1 | 10uf | C_0603_1608Metric | C9 |
| 5 | 1uf | C_0603_1608Metric | C10, C15, C16, C17, C18 |
| 1 | 0.1uf | C_0603_1608Metric | C11 |
| 1 | 470R | R_0603_1608Metric | R1 |
| 6 | 10k | R_0603_1608Metric | R10, R11, R18, R19, R20, R21 |
ESP DRONE design files
The KiCad project lives in the TR-JAYAVARDHAN-SINGH/Auto_Drone-with-esp32 repository on GitHub; these links point at the commit this page was built from.
ESP DRONE: common questions
What microcontroller does the ESP DRONE use?
The ESP DRONE is built around the AO3401, from the ESP32 family.
How big is the ESP DRONE PCB?
The ESP DRONE measures 41.9 × 39.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ESP DRONE?
42 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the ESP DRONE design files?
From the TR-JAYAVARDHAN-SINGH/Auto_Drone-with-esp32 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the ESP DRONE design in my own project?
The repository has no license, so all rights stay with TR-JAYAVARDHAN-SINGH. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ESP DRONE without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Auto_Drone-with-esp32
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k