STM32SESNSEHAT

Travimadox·STM32SESNSEHAT·PCB/STM32SENSEHAT/STM32SENSEHAT.kicad_pcb

STM32SESNSEHAT PCB layout, top view — open source STM32 board by Travimadox

About the STM32SESNSEHAT PCB

STM32SESNSEHAT is an open source STM32 PCB design by Travimadox, published on GitHub under the MIT license. It is a 2-layer board measuring 100 × 100 mm, with 76 components from 43 distinct parts.

Its main chip is the STM32F051C6T6, from the STM32 family. Other key parts include the MCP1700X-330XXTT, DW01A, FT234XD-R, TMP102XXDRL and CAT24C256. By type, the board carries 25 resistors, 21 capacitors, 10 ICs, 8 connectors, 5 diodes and 2 jumpers.

It belongs with the sensors designs in this gallery.

From the project

The Imperium Environmental Monitoring HAT is a cutting-edge hardware accessory designed for use with STM32 microcontrollers. It is tailored for environmental monitoring and equipped with high-precision sensors for temperature and light. This allows for accurate data collection in

The Imperium Environmental Monitoring HAT is a cutting-edge hardware accessory designed for use with STM32 microcontrollers. It is tailored for environmental monitoring and equipped with high-precision sensors for temperature and light. This allows for accurate data collection in various applications, including weather monitoring, room temperature monitoring, and greenhouse monitoring, providing invaluable insights into environmental conditions.

STM32SESNSEHAT, from the project README
From the project README

Main components on the STM32SESNSEHAT

STM32SESNSEHAT bill of materials (BOM)

76 components, 43 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MCP1700X-330XXTT
MCP1700x-330xxTT
U1
1
DW01A
U2
1
FT234XD-R
U3
1
TMP102XXDRL
TMP102xxDRL
U4
1
CAT24C256
U5
1
LTR-303ALS-01
U6
1
TP4056
U7
1
~
U8
1
STLINK_UCT
U9
1
AO3401A_C306862
U11
1
FS8205A
Q1
1
XXDCELNANF-8MHZ
X1
2
USB_B_Micro
J1, J3
1
CONN_01X05_PIN
Conn_01x05_Pin
J2
2
CONN_01X24_PIN
Conn_01x24_Pin
J5, J8
1
CONN_01X10_PIN
Conn_01x10_Pin
J9
1
CONN_01X01_PIN
Conn_01x01_Pin
J10
1
CONN_01X02_PIN
Conn_01x02_Pin
J11
1
Battery_Cell
BT2
1
SOLDERJUMPER_2_OPEN
SolderJumper_2_Open
JP1
Show 23 more
QtyPartRefs
1
SOLDERJUMPER_2_OPEN
SolderJumper_2_Open
JP2
1
SW_Push
SW1
2
D_Schottky
D1, D6
3
LED
D2, D4, D5
1
FerriteBead
FB1
3
100NF
100nF
C1, C6, C15
1
10NF
10nF
C2
1
4.7UF
4.7uF
C3
2
47PF
47pF
C4, C5
3
1UF
1uF
C7, C10, C11
3
100NF
100nF
C8, C9, C19
1
1UF
1uF
C12
2
10NF
10nF
C13, C14
1
4.7UF
4.7uF
C16
2
10PF
10pF
C17, C18
2
10UF
10uF
C20, C21
11
0R
R1, R8, R9, R10, R11, R12, R13, R14 +3
2
27R
R2, R3
4
1K0
1k0
R4, R7, R22, R40
4
10K
10k
R5, R19, R20, R36
1
100R
R6
2
4K7
4k7
R15, R18
1
LDR07
R21

STM32SESNSEHAT design files

The KiCad project lives in the Travimadox/STM32SESNSEHAT repository on GitHub; these links point at the commit this page was built from.

STM32SESNSEHAT: common questions

What microcontroller does the STM32SESNSEHAT use?

The STM32SESNSEHAT is built around the STM32F051C6T6, from the STM32 family.

How big is the STM32SESNSEHAT PCB?

The STM32SESNSEHAT measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the STM32SESNSEHAT?

76 components, from 43 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the STM32SESNSEHAT design files?

From the Travimadox/STM32SESNSEHAT repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the STM32SESNSEHAT design in my own project?

Yes, under the terms of its MIT license, which Travimadox chose for the repository.

Can I test firmware for the STM32SESNSEHAT without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards