HardLabs

Panel

TrojanPinata·Pico·pico/panel/panel.kicad_pcb

Panel PCB layout, top view — open source RP2040/RP2350 board by TrojanPinata

About the Panel PCB

Panel is an open source RP2040/RP2350 PCB design by TrojanPinata, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 77 × 119 mm, with 49 components from 29 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the W25Q16JVUXIQ and TLV75533PDBVR. By type, the board carries 18 capacitors, 14 resistors, 4 connectors, 3 ICs, 3 test points and 2 switches.

From the project

A Raspberry Pi Pico clone with some quality of life features

The goal of this was to prove the feasability of using PCBA as well as prove my ability to make a functioning RP2040 microcontroller board. The Pi Pico was simply chosen as it was a very accessible option.

If you want to use this project, it should be noted that this is open source, but I would rather you simply use this as a reference. Putting that much confidence in someone elses work is dangerous, and I cannot guarantee spec with the original.

Panel, from the project README
From the project README

Main components on the Panel

RP2040W25Q16JVUXIQTLV75533PDBVR

Panel bill of materials (BOM)

49 components, 29 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RP2040
U1
1
W25Q16JVUXIQ
U2
1
TLV75533PDBVR
U3
1
12MHZ
12MHz
Y1
1
LEFT_PINS
J1
1
RIGHT_PINS
J2
1
BOTTOM_PINS
J3
1
USB_C_RECEPTACLE_USB2.0
USB_C_Receptacle_USB2.0
J4
1
0805L050WR
F1
1
RESET
SW1
1
BOOT_SEL
SW2
3
TestPoint
TP1, TP2, TP3
1
LED
D1
1
1N4002W
D3
1
FB
FB1
11
0.1UF
0.1uF
C1, C2, C4, C5, C6, C7, C8, C9 +3
1
1UF
1uF
C3
2
2.2UF
2.2uF
C11, C12
2
10UF
10uF
C13, C19
2
22PF
22pF
C14, C15
Show 9 more
QtyPartRefs
2
27
R1, R2
1
200
R3
1
1
R4
1
470
R5
2
1k
R7, R8
3
10K
10k
R9, R10, R14
2
5.1K
5.1k
R11, R12
1
5.6K
5.6k
R13
1
100K
100k
R15

Panel design files

The KiCad project lives in the TrojanPinata/Pico repository on GitHub; these links point at the commit this page was built from.

Panel: common questions

What microcontroller does the Panel use?

The Panel is built around the RP2040, from the RP2040/RP2350 family.

How big is the Panel PCB?

The Panel measures 77 × 119 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Panel?

49 components, from 29 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Panel design files?

From the TrojanPinata/Pico repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Panel design in my own project?

Yes, under the terms of its GPL-3.0 license, which TrojanPinata chose for the repository.

Can I test firmware for the Panel without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in Pico

Similar boards