HardLabs

Ts13 dev kit

tropicsquare·devboards·TROPIC01_USB_Devkit/PCB/TS1303/ts13_dev_kit.kicad_pcb

Ts13 dev kit PCB layout, top view — open source STM32 board by tropicsquare
Simulate this board

About the Ts13 dev kit PCB

Ts13 dev kit is an open source STM32 PCB design by tropicsquare, published on GitHub under the CERN-OHL-P-2.0 license. It is a 2-layer board measuring 20 × 46 mm, with 39 components from 22 distinct parts.

Its main chip is the STM32U535CCTX, from the STM32 family. Other key parts include the TROPIC01_CHIP, TPS7A0533PDBZR and TPS22917DBV. By type, the board carries 14 capacitors, 14 resistors, 4 ICs, 3 diodes, 1 crystal and 1 connector.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

Repository collects hw resources for development boards which are available for the TROPIC01 chip

This repository contains hardware design files for the TROPIC01 USB Devkit.

Following folders contain schematics, layouts, BOMs and gerber files.

Common specifications for all revisions: - Layers: 2-layer - Thickness: 1.0 mm - Material: FR4 - Solder Mask: Blue - Silkscreen: Yes (top and bottom)

Standard SMD components (0805 size): - Resistor tolerance: 5% (unless specified) - Capacitor tolerance: 20% (unless specified)

Main components on the Ts13 dev kit

TROPIC01_CHIPSTM32U535CCTXTPS7A0533PDBZRTPS22917DBV

Ts13 dev kit bill of materials (BOM)

39 components, 22 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TROPIC01_CHIP
TROPIC01_chip
IC1
1
STM32U535CCTX
STM32U535CCTx
IC2
1
TPS7A0533PDBZR
IC3
1
TPS22917DBV
IC4
1
8MHZ
8MHz
X1
1
179-UP20CFGFLP12TR
USB_C_Plug
J1
1
594-MFU0805FF00500P1
Fuse 500mA
F1
1
611-PTS636SM25SMTRLF
tact switch
SW1
1
710-150080RS75000
LED_R
D1
1
710-150080GS75000
LED_G
D2
1
PRTR5V0U2X
D3
3
100N/603
100n/603
C1, C2, C3
3
4U7/16V
4u7/16V
C4, C7, C14
4
100N
100n
C5, C6, C9, C13
2
10N
10n
C8, C10
2
10P
10p
C11, C12
1
33K
33k
R1
8
1k
R2, R3, R4, R5, R6, R7, R13, R14
1
5K1
5k1
R8
2
10R
R9, R10
Show 2 more
QtyPartRefs
1
1K5
1k5
R11
1
220R
R12

Ts13 dev kit design files

The KiCad project lives in the tropicsquare/devboards repository on GitHub; these links point at the commit this page was built from.

Ts13 dev kit: common questions

What microcontroller does the Ts13 dev kit use?

The Ts13 dev kit is built around the STM32U535CCTX, from the STM32 family.

How big is the Ts13 dev kit PCB?

The Ts13 dev kit measures 20 × 46 mm, has 2 copper layers and is 0.89 mm thick.

How many components are on the Ts13 dev kit?

39 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Ts13 dev kit design files?

From the tropicsquare/devboards repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Ts13 dev kit design in my own project?

Yes, under the terms of its CERN-OHL-P-2.0 license, which tropicsquare chose for the repository.

Can I test firmware for the Ts13 dev kit without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in devboards

Similar boards