Ts15-rpi shield
About the Ts15-rpi shield
Ts15-rpi shield is an open source PCB design by tropicsquare, published on GitHub under the CERN-OHL-P-2.0 license. It is a 2-layer board measuring 56 × 65 mm, with 11 components from 8 distinct parts.
Other key parts include the TROPIC01_CHIP. By type, the board carries 3 connectors, 3 capacitors, 3 resistors, 1 IC and 1 diode.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Repository collects hw resources for development boards which are available for the TROPIC01 chip
TS15 – TROPIC01 Raspberry Pi Shield A KiCad-based hardware project designed to connect the TROPIC01 device to a Raspberry Pi via the standard 40-pin GPIO header.
This shield enables straightforward integration of TROPIC01 into Raspberry Pi-based development and testing environments. It is intended for development, evaluation, and prototyping use.
.kicadpro - KiCad project file .kicadsch - Schematic file .kicadpcb - PCB layout file ./out/ - Generated Gerber files for PCB manufacturing ./bom/ - Bill of materials, including order codes and interactive BOM ./img/ - Images (e.g. PCB renders)…
Main components on the Ts15-rpi shield
Ts15-rpi shield bill of materials (BOM)
11 components, 8 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TROPIC01_CHIP TROPIC01_chip | QFN-32-1EP_4x4mm_P0.4mm_EP2.65x2.65mm | IC1 |
| 1 | TROPIC01 | TROPIC01_mikrobus | CON1 |
| 1 | 474-PRT-16764 RPI socket | RPI_Hat_B+ | J1 |
| 1 | CS select jumper switch | PinHeader_2x03_P2.54mm_Vertical | J2 |
| 1 | 710-150080GS75000 LED_G | LED_0805_2012Metric | D1 |
| 3 | 100N 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3 |
| 2 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 1 | 47K 47k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
Ts15-rpi shield design files
The KiCad project lives in the tropicsquare/devboards repository on GitHub; these links point at the commit this page was built from.
Ts15-rpi shield: common questions
How big is the Ts15-rpi shield?
The Ts15-rpi shield measures 56 × 65 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Ts15-rpi shield?
11 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Ts15-rpi shield design files?
From the tropicsquare/devboards repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Ts15-rpi shield design in my own project?
Yes, under the terms of its CERN-OHL-P-2.0 license, which tropicsquare chose for the repository.
More boards in devboards
Similar boards
Radioberry juice
pa3gsb
65 × 56 mm87 parts2LNo license675
Radioberry preamp
65 × 56 mm137 parts2LNo license675
Hat
65 × 56 mm81 parts2LNo license675
Sram dev board
Wren6991
50 × 50 mm12 parts2LNo license508
ESP32
Chrismettal
66.4 × 48.1 mm20 parts2LCC-BY-SA-4.0446
ESP32
66.4 × 48.1 mm20 parts2LCC-BY-SA-4.0446