Ts14-arduino shield
About the Ts14-arduino shield
Ts14-arduino shield is an open source AVR/Arduino PCB design by tropicsquare, published on GitHub under the CERN-OHL-P-2.0 license. It is a 2-layer board measuring 58 × 53 mm, with 13 components from 8 distinct parts.
Its main chip is the ARDUINO_UNO_R3_SHIELD, from the AVR/Arduino family. Other key parts include the TROPIC01_CHIP and TXU0304PWR. By type, the board carries 5 capacitors, 3 resistors, 2 ICs, 1 connector and 1 diode.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Repository collects hw resources for development boards which are available for the TROPIC01 chip
TS14 – TROPIC01 Arduino Shield A KiCad-based hardware project designed to interface the TROPIC01 device with standard Arduino development boards.
This shield allows easy integration of TROPIC01 into Arduino-based environments for development, testing, and prototyping. It is intended for internal use and partner evaluation setups, following the Arduino mechanical and electrical interface.
Main components on the Ts14-arduino shield
Ts14-arduino shield bill of materials (BOM)
13 components, 8 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TROPIC01_CHIP TROPIC01_chip | QFN-32-1EP_4x4mm_P0.4mm_EP2.65x2.65mm | IC1 |
| 1 | TXU0304PWR | TSSOP-14_4.4x5mm_P0.65mm | IC2 |
| 1 | TROPIC01 | TROPIC01_mikrobus | CON1 |
| 1 | ARDUINO_UNO_R3_SHIELD Arduino_Uno_R3_Shield | Arduino_Uno_R3_Shield | Shield1 |
| 1 | 710-150080GS75000 LED_G | LED_0805_2012Metric | D1 |
| 5 | 100N 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C5 |
| 2 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R6 |
| 1 | 47K 47k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
Ts14-arduino shield design files
The KiCad project lives in the tropicsquare/devboards repository on GitHub; these links point at the commit this page was built from.
Ts14-arduino shield: common questions
What microcontroller does the Ts14-arduino shield use?
The Ts14-arduino shield is built around the ARDUINO_UNO_R3_SHIELD, from the AVR/Arduino family.
How big is the Ts14-arduino shield?
The Ts14-arduino shield measures 58 × 53 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Ts14-arduino shield?
13 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Ts14-arduino shield design files?
From the tropicsquare/devboards repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Ts14-arduino shield design in my own project?
Yes, under the terms of its CERN-OHL-P-2.0 license, which tropicsquare chose for the repository.
Can I test firmware for the Ts14-arduino shield without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in devboards
Similar boards
AVR/ArduinoModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoV4
30 × 50 mm38 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoEasyduino Atmega
Hanqaqa
68.8 × 53.6 mm35 parts4LCERN-OHL-P-2.0746
AVR/ArduinoEasyduino Atmega Nano
43.4 × 18 mm30 parts4LCERN-OHL-P-2.0746
AVR/ArduinoUsbGpib
xyphro
54 × 15 mm21 parts2LMIT683
AVR/ArduinoLumberjack
peej
284.7 × 94.2 mm149 parts2LMIT402