Turtable control board servo
trublion·turtable_control_board_servo·cad/bab_top.kicad_pcb
About the Turtable control board servo
Turtable control board servo is an open source PCB design by trublion, published on GitHub under the MIT license. It is a 2-layer board measuring 90 × 90 mm, with 84 components from 41 distinct parts.
Other key parts include the LM833, LM358 and LM2674. By type, the board carries 34 resistors, 21 capacitors, 9 diodes, 8 connectors, 3 ICs and 3 transistors.
It belongs with the audio and robotics & motion designs in this gallery.
From the project
HW control board for turntable. Controls a Teknic Clearpath servo motor, reads an analog audio signal envelope.
HW control board for turntable. Controls a Teknic Clearpath servo motor, reads an analog audio signal envelope.
IEC plug Potentiometer RK09L Neutrik combo
Clearpath documentation and software Motor user's manual : ClearPath-MC and -SD Series User manual Software : ClearPath-MC and -SD Series Motor Setup Program (MSP) Mechanical drawings : NEMA 23xx Clearpath Motor familly 74HCT4066 Shunt resistors BAS21 small signal diode Zener diodes Electrolytic capacitors LM358 comparator LM833 operational amplifier LM2674 DCDC controller MBRS3100T3G Schottky power diode RS2 power diode Power inductor
Main components on the Turtable control board servo
Turtable control board servo bill of materials (BOM)
84 components, 41 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM833 | SOIC-8_3.9x4.9mm_Pitch1.27mm | U201 |
| 1 | LM358 | SOIC-8_3.9x4.9mm_Pitch1.27mm | U202 |
| 1 | LM2674 | SOIC-8_3.9x4.9mm_Pitch1.27mm | U301 |
| 1 | J201 | SOT-23_Handsoldering | Q101 |
| 2 | DTC114Y | SOT-23 | Q102, Q103 |
| 6 | CONN_01X02 | Pin_Header_Straight_1x02_Pitch2.54mm | P101, P104, P105, P106, P107, P110 |
| 1 | CONN_01X02 | bornier2 | P102 |
| 1 | Nulceo_F303K8_CONN | Nucleo_F303K8_CONN | P103 |
| 3 | 10k | ALPS_RK09L | RV101, RV102, RV103 |
| 1 | RK09L_stereo | ALPS_RK09L_stereo | RV201 |
| 1 | 100k | Pin_Header_Straight_1x03_Pitch2.54mm | RV205 |
| 4 | MBRS3100T3G | DO-214AC | D101, D301, D302, D303 |
| 1 | Led_Small | Pin_Header_Straight_1x02 | D102 |
| 2 | BAS21 | SOT-23_Handsoldering | D201, D202 |
| 2 | Led_Small | Pin_Header_Straight_1x02_Pitch2.54mm | D203, D402 |
| 1 | 100u | Choke_SMD_7.3x7.3_H3.5 | L301 |
| 7 | 100n | C_0805_HandSoldering | C101, C102, C106, C107, C208, C304, C307 |
| 2 | 220n | C_0805_HandSoldering | C103, C104 |
| 3 | 100u | CP_Elec_6.3x7.7 | C105, C303, C306 |
| 1 | 1u | C_2220_HandSoldering | C201 |
Show 21 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 100p | C_0805_HandSoldering | C202, C205 |
| 3 | 47u | CP_Elec_6.3x7.7 | C203, C204, C206 |
| 1 | 6.8u | CP_Elec_5x5.7 | C207 |
| 1 | 10u | CP_Elec_6.3x7.7 | C209 |
| 1 | 10n | C_0805_HandSoldering | C305 |
| 1 | 1k | R_0805_HandSoldering | R1 |
| 5 | 330 | C_0805_HandSoldering | R101, R106, R110, R112, R113 |
| 3 | 1M | C_0805_HandSoldering | R102, R107, R202 |
| 8 | 33k | C_0805_HandSoldering | R103, R203, R204, R209, R210, R211, R212, R213 |
| 2 | 4.7k | C_0805_HandSoldering | R104, R208 |
| 2 | 1k | C_1206_HandSoldering | R105, R111 |
| 2 | 10k | C_0805_HandSoldering | R108, R214 |
| 1 | 100k | C_0805_HandSoldering | R109 |
| 2 | 1k | C_0805_HandSoldering | R201, R215 |
| 1 | 2k2 | C_0805_HandSoldering | R205 |
| 2 | 100 | C_0805_HandSoldering | R206, R217 |
| 1 | 75k | C_0805_HandSoldering | R207 |
| 1 | 0 | C_0805_HandSoldering | R216 |
| 1 | 470k | C_0805_HandSoldering | R218 |
| 1 | 47k | R_0805_HandSoldering | R301 |
| 1 | 10k | R_0805_HandSoldering | R302 |
Turtable control board servo design files
The KiCad project lives in the trublion/turtable_control_board_servo repository on GitHub; these links point at the commit this page was built from.
- Layoutcad/bab_top.kicad_pcb
Turtable control board servo: common questions
How big is the Turtable control board servo?
The Turtable control board servo measures 90 × 90 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Turtable control board servo?
84 components, from 41 distinct parts. The full bill of materials is listed on this page.
Where can I download the Turtable control board servo design files?
From the trublion/turtable_control_board_servo repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Turtable control board servo design in my own project?
Yes, under the terms of its MIT license, which trublion chose for the repository.
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kKLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kPowerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.0979Trollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979