Ultrasonic water depth measurement

ts01af·Ultrasonic-water-depth-measurement·Mastersthesis/Mastersthesis.kicad_pcb

Ultrasonic water depth measurement PCB layout, top view — open source STM32 board by ts01af

About the Ultrasonic water depth measurement PCB

Ultrasonic water depth measurement is an open source STM32 PCB design by ts01af, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 92 components from 55 distinct parts.

Its main chip is the STM32F070CBTx, from the STM32 family. Other key parts include the MT2492, MT3608L, FM2113 and SAM-M10Q-00B. By type, the board carries 28 resistors, 23 capacitors, 12 diodes, 5 ICs, 5 transistors and 4 connectors.

It belongs with the test & measurement designs in this gallery.

From the project

This repository will contain KiCad project for an ultrasonic water depth measurement platform

Masterthesis.kicadpcb is the used pcb file Masterthesis.kicadsch is the used schematic file

Main components on the Ultrasonic water depth measurement

Ultrasonic water depth measurement bill of materials (BOM)

92 components, 55 distinct parts.

QtyPartRefs
1
MT2492
U1
1
MT3608L
U2
1
FM2113
U3
1
STM32F070CBTx
U4
1
SAM-M10Q-00B
U5
1
GD25Q32ESIG
M1
3
Q_NMOS_GSD
Q1, Q2, Q3
2
Q_PNP_BCE
Q4, Q5
1
8MHz
Y1
1
SWD
J1
2
Conn_01x04_Pin
J2, J4
1
USB_C_Receptacle_USB2.0_16P
J3
1
3.7V
BT1
1
3V
BT2
1
Buzzer
BZ1
2
500mA
F1, F2
2
PS-5850DVA-6PN
S1, S2
1
TS-1088-AR02016
S3
1
SS-12D11G5R Slide Switch
SW1
3
D_Schottky
D1, D2, D3
Show 35 more
QtyPartRefs
1
3V
D4
1
SP0503BAHT
D5
1
BLUE
D6
1
RED
D7
1
ORANGE
D8
1
YELLOW
D9
3
GREEN
D10, D11, D12
1
BLM18PG330SN1D
FB1
1
4.7uH
L1
2
10uH
L2, L3
1
22nF/16V
C1
10
100nF/10V
C2, C4, C9, C10, C15, C16, C17, C18 +2
2
22uF/25V
C3, C6
2
22uF/25V
C5, C7
2
4.7uF/25V
C8, C19
2
33pF
C11, C14
1
10uF/10V
C12
1
100nF/25V
C13
1
2.2uF/10V
C21
1
4.7nF/16V
C22
4
10k
R1, R18, R27, R28
1
68k
R2
1
270k
R3
2
15k
R4, R6
1
82k
R5
1
100
R7
3
100k
R8, R9, R11
1
2k
R10
1
150
R12
1
2.2k
R13
7
1k
R14, R21, R22, R23, R24, R25, R26
1
6.2k
R15
2
5.1k
R16, R17
1
1Meg
R19
1
560
R20

Ultrasonic water depth measurement design files

The KiCad project lives in the ts01af/Ultrasonic-water-depth-measurement repository on GitHub; these links point at the commit this page was built from.

Ultrasonic water depth measurement: common questions

What microcontroller does the Ultrasonic water depth measurement use?

The Ultrasonic water depth measurement is built around the STM32F070CBTx, from the STM32 family.

How big is the Ultrasonic water depth measurement PCB?

The Ultrasonic water depth measurement measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Ultrasonic water depth measurement?

92 components, from 55 distinct parts. The full bill of materials is listed on this page.

Where can I download the Ultrasonic water depth measurement design files?

From the ts01af/Ultrasonic-water-depth-measurement repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Ultrasonic water depth measurement design in my own project?

The repository has no license, so all rights stay with ts01af. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Ultrasonic water depth measurement without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards