24 open source boards using the MT2492

Real designs built with the MT2492, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

24 boardsClear filters|Most starred

How designs wire the MT2492

Read from the KiCad layouts of 21 open source designs, one per repository: what each pin of the MT2492 connects to, and the resistors, capacitors and other passives placed on it.

  • The SW pin has a inductor on 20 of 21 designs, most often 10 µH (then 4.7 µH).
  • The BS pin has a series capacitor on 19 of 21 designs, most often 22 nF (then 100 nF).
  • The FB pin has a resistor to GND on 19 of 21 designs, most often 15 kΩ (then 22 kΩ).
  • The SW pin has a series capacitor on 19 of 21 designs, most often 22 nF (then 100 nF).
BSpin 1Connected to: Signal 90%
  • Series capacitor on 90% · 22 nF (17), 100 nF (2)
GNDpin 2Connected to: GND 95%
FBpin 3Connected to: Signal 95%
  • Resistor to GND on 90% · 15 kΩ (5), 22 kΩ (5), 4.7 kΩ (2)
  • Pull-up to 5V on 76% · 100 kΩ (6), 110 kΩ (4), 18 kΩ (1)
  • Capacitor to the supply on 38% · 22 pF (7), 18 pF (1)
ENpin 4Connected to: A connector 24% · 12V 38%
  • Capacitor to GND on 48% · 22 µF (7), 22 nF (3), 100 nF (1)
VINpin 5Connected to: 12V 62% · a signal 38%
  • Decoupling capacitor on 86% · 22 µF (12), 10 µF (5), 100 nF (3)
SWpin 6Connected to: Signal 95%
  • Inductor on 95% · 10 µH (7), 4.7 µH (6), 6.8 µH (2)
  • Series capacitor on 90% · 22 nF (17), 100 nF (2)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Dual CPU Base Board by Twisted-Fields, Ch32v307gigabit by cnlohr, Acorn serial by Twisted-Fields and H616 devboard by Kononenko-K.

The MT2492 in open source designs

The gallery holds 24 open source boards using the MT2492 from 21 GitHub repositories; a typical one measures about 63.3 × 69.2 mm and carries around 88 components.

54% use four copper layers or more, and 46% carry an open source license.

The most starred is Dual CPU Base Board by Twisted-Fields.

Microcontrollers on boards using the MT2492

MT2492: common questions

Where can I find a MT2492 reference design?

Each of the 24 boards on this page is a real design using the MT2492. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the MT2492 SW pin connected?

The SW pin has a inductor on 20 of 21 designs, most often 10 µH (then 4.7 µH). Counted from the KiCad layouts of 21 open source designs using the MT2492.

How is the MT2492 BS pin connected?

The BS pin has a series capacitor on 19 of 21 designs, most often 22 nF (then 100 nF). Counted from the KiCad layouts of 21 open source designs using the MT2492.

What resistor goes on the MT2492 FB pin?

The FB pin has a resistor to GND on 19 of 21 designs, most often 15 kΩ (then 22 kΩ). Counted from the KiCad layouts of 21 open source designs using the MT2492.

What parts are used alongside the MT2492?

The ADC081S021CISD/NOPB, ADS7822U, AMS1117-3.3, CH9102F and ESP32-WROOM-32 appear in the most repositories here.

Which microcontrollers do boards using the MT2492 use?

Most are built on ESP32 (8), STM32 (5) and RP2040/RP2350 (3).

How big is a typical board using the MT2492?

The median is 63.3 × 69.2 mm, and 46% are two-layer designs.

What is the most popular open source board using the MT2492?

By GitHub stars, Dual CPU Base Board by Twisted-Fields, with 419 stars.

Can I simulate one of these boards using the MT2492 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part