Fishie
TVDVT·fishie·PCB/starbie.kicad_pcb
About the Fishie PCB
Fishie is an open source ESP32 PCB design by TVDVT, published on GitHub. It is a 2-layer board measuring 99.3 × 74.7 mm, with 7 components from 6 distinct parts.
Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. Other key parts include the DHT11. By type, the board carries 2 ICs, 2 connectors, 2 switches and 1 resistor.
From the project
Starbie is a tiny motion-controlled digital pet: basically a desktop Tamagotchi with minimal gameplay buttons. Instead of pressing controls, you interact with it by physically moving the board.
Starbie is a tiny motion-controlled digital pet: basically a desktop Tamagotchi with minimal gameplay buttons. Instead of pressing controls, you interact with it by physically moving the board.
This guide from Half Life! was used to complete this project!
The screen contains a little koi fish that swims freely from left to right. You can pet it, feed it and play with it using both the key switches and a tilting mechanism. As you play with it, its energy decreases, making him sleepy. Thankfully, there is an option to let the fishie sleep :D. Its love also increases as you play with him and…
Main components on the Fishie
Fishie bill of materials (BOM)
7 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-ESP32-C3-SMD | XIAO-ESP32-C6-DIP | U1 |
| 1 | DHT11 | Aosong_DHT11_5.5x12.0_P2.54mm | U2 |
| 1 | Conn_01x04_Pin | Display_128x64_096_I2C | J1 |
| 1 | Conn_01x08_Pin | PinHeader_1x08_P2.54mm_Vertical | J2 |
| 2 | SW_Push | SW_Cherry_MX_1.00u_PCB | SW1, SW2 |
| 1 | 10k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
Fishie design files
The KiCad project lives in the TVDVT/fishie repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/starbie.kicad_pcb
- SchematicPCB/starbie.kicad_sch
Fishie: common questions
What microcontroller does the Fishie use?
The Fishie is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.
How big is the Fishie PCB?
The Fishie measures 99.3 × 74.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Fishie?
7 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the Fishie design files?
From the TVDVT/fishie repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Fishie design in my own project?
The repository has no license, so all rights stay with TVDVT. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Fishie without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k