11 open source boards using the LM324DR
Real designs built with the LM324DR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Eve pi
vishhvaan
103.5 × 90.6 mm102 parts4LMIT15STM32
Fsk energymeter
luftaquila
90 × 74 mm79 parts2LCustom license13Amiga-Stereo-Digitizer
wiretap-retro
71.4 × 53.1 mm37 parts2LNo license8Music Visualizer
GhanGhan
295 × 155 mm253 parts2LNo license6AP420-Renewed-Amiga-Audio-Digitizer
wiretap-retro
69 × 53.3 mm30 parts2LNo license2STM32
Fsk energymeter ble-222
ducknine17
90 × 74 mm79 parts2LCustom license0STM32
Fsk energymeter ble
ducknine17
90 × 74 mm79 parts2LCustom license0STM32
Fsk energymeter
ducknine17
90 × 74 mm79 parts2LCustom license0D-Class Amplifier
Niels-Clayton
180 × 65 mm71 parts2LNo license0Bottom Board
avnguyen08
74.8 × 84.5 mm56 parts2LNo license01-DIN Control Panel
twfth9
177.8 × 120.9 mm82 parts2LGPL-3.00
How designs wire the LM324DR
Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the LM324DR connects to, and the resistors, capacitors and other passives placed on it.
- The - pins have a series resistor on 11 of 11 designs, most often 10 kΩ (then 100 kΩ).
- The + pins have a resistor to GND on 9 of 11 designs, most often 10 kΩ (then 100 kΩ).
- The + pins have a series resistor on 8 of 11 designs, most often 22 kΩ (then 20 kΩ).
- Pin 7 has a series resistor on 8 of 11 designs, most often 2 kΩ (then 100 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: The microcontroller 36% |
|
| -pin 2, 6, 9, 13 | Connected to: The microcontroller 27% |
|
| +pin 3, 5, 10, 12 | Connected to: Signal 91% |
|
| V+pin 4 | Connected to: 5V 100% |
|
| Pin 7 | Connected to: Signal 100% |
|
| Pin 8 | Connected to: The microcontroller 36% |
|
| V-pin 11 | Connected to: GND 82% · -5V 18% | — |
| Pin 14 | Connected to: The microcontroller 36% · not connected 18% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Eve pi by vishhvaan, Fsk energymeter by luftaquila, Amiga-Stereo-Digitizer by wiretap-retro and Music Visualizer by GhanGhan.
The LM324DR in open source designs
The gallery holds 11 open source boards using the LM324DR from 11 GitHub repositories; a typical one measures about 90 × 74 mm and carries around 79 components.
91% are two-layer designs, the rest use four layers or more, and 18% carry an open source license.
The most starred is Eve pi by vishhvaan.
Parts used alongside the LM324DR
Microcontrollers on boards using the LM324DR
What boards using the LM324DR are built for
LM324DR: common questions
Where can I find a LM324DR reference design?
Each of the 11 boards on this page is a real design using the LM324DR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the LM324DR - pin?
The - pins have a series resistor on 11 of 11 designs, most often 10 kΩ (then 100 kΩ). Counted from the KiCad layouts of 11 open source designs using the LM324DR.
What resistor goes on the LM324DR + pin?
The + pins have a resistor to GND on 9 of 11 designs, most often 10 kΩ (then 100 kΩ). Counted from the KiCad layouts of 11 open source designs using the LM324DR.
What resistor goes on the LM324DR pin 7?
Pin 7 has a series resistor on 8 of 11 designs, most often 2 kΩ (then 100 kΩ). Counted from the KiCad layouts of 11 open source designs using the LM324DR.
What parts are used alongside the LM324DR?
The AMC3311QDWERQ1, AMS1117-3.3, L78L05ABUTR, LM2675MX-5.0/NOPB and NCP51460SN33T1G appear in the most repositories here.
Which microcontrollers do boards using the LM324DR use?
Most are built on STM32 (4).
How big is a typical board using the LM324DR?
The median is 90 × 74 mm, and 91% are two-layer designs.
What is the most popular open source board using the LM324DR?
By GitHub stars, Eve pi by vishhvaan, with 15 stars.
Can I simulate one of these boards using the LM324DR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.