Pomodorov2

twopoint718·pomodorov2·hardware/pomodorov2.kicad_pcb

Pomodorov2 PCB layout, top view — open source Nordic nRF board by twopoint718

About the Pomodorov2 PCB

Pomodorov2 is an open source Nordic nRF PCB design by twopoint718, published on GitHub. It is a 2-layer board measuring 56 × 41.4 mm, with 19 components from 15 distinct parts.

Its main chip is the MDBT50Q-1MV2, from the Nordic nRF family. By type, the board carries 9 capacitors, 3 connectors, 2 crystals, 2 resistors, 1 IC and 1 jumper.

It belongs with the displays & leds, iot & wireless and sensors designs in this gallery.

From the project

Moving the orientation-sensitive desktop timer (mark II) into its own project

Orientation-sensitive desktop timer (mark II). Codename "Otter" (because they're cute & cuddly, hard-working, and like to roll over).

- cad 3D design files for the case and other supporting mechanical features. - docs documentation both from a developer and also from the point of view of an end user. - firmware the software running on the board, any needed bootstrapping code, and support scripts - hardware the KiCAD schematic and board layout - production files needed to manufacture the board, BOM, gerbers & etc.

Main components on the Pomodorov2

Pomodorov2 bill of materials (BOM)

19 components, 15 distinct parts.

QtyPartRefs
1
MDBT50Q-1MV2
U1
1
32MHz
Y1
1
32.768kHz
Y2
1
USB_B_Micro
J1
1
TC2050-IDC
J2
1
SOICbite
J3
1
SolderJumper_2_Open
JP1
1
3.9nH
L1
4
12pF
C1, C2, C8, C9
1
0.8pF
C3
2
100nF
C4, C7
1
100pF
C5
1
1.0uF
C6
1
100K
R1
1
22
R2

Pomodorov2 design files

The KiCad project lives in the twopoint718/pomodorov2 repository on GitHub; these links point at the commit this page was built from.

Pomodorov2: common questions

What microcontroller does the Pomodorov2 use?

The Pomodorov2 is built around the MDBT50Q-1MV2, from the Nordic nRF family.

How big is the Pomodorov2 PCB?

The Pomodorov2 measures 56 × 41.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Pomodorov2?

19 components, from 15 distinct parts. The full bill of materials is listed on this page.

Where can I download the Pomodorov2 design files?

From the twopoint718/pomodorov2 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Pomodorov2 design in my own project?

The repository has no license, so all rights stay with twopoint718. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Pomodorov2 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.

Similar boards