148-winter-2025-final project team-11
UCSD-Silberman-Classes-and-Projects·148-winter-2025-final-project-team-11·ECE148_Mainboard_PCB/ECE148_Mainboard.kicad_pcb
About the 148-winter-2025-final project team-11 PCB
148-winter-2025-final project team-11 is an open source ESP32 PCB design by UCSD-Silberman-Classes-and-Projects, published on GitHub. It is a 4-layer board measuring 67 × 77.5 mm, with 72 components from 40 distinct parts.
Its main chip is the ESP32-S3-MINI-1-N8, from the ESP32 family. Other key parts include the WS2812B-B. By type, the board carries 21 resistors, 14 connectors, 12 capacitors, 7 diodes, 6 transistors and 5 ICs.
It belongs with the iot & wireless, displays & leds and power & battery designs in this gallery.
From the project
148-winter-2025-final-project-team-11 created by GitHub Classroom
- MingWei Yeoh - ECE - 2025 - Trevor - Minh Quach - Jose
An realistic looking autonomous car that can activate lights when it detects a speeding car and autonomously pull it over or initiate a chase.
Past MAE projects haven’t tried to use car following for a real task, nor make their autonomous car LOOK like an actual car. Mechanically it will be a challenge to mount all the electronics inside of a small car body.

Main components on the 148-winter-2025-final project team-11
148-winter-2025-final project team-11 bill of materials (BOM)
72 components, 40 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-MINI-1-N8 | XCVR_ESP32-S3-MINI-1-N8 | U1 |
| 1 | ~ | SOT-23-5 | U2 |
| 1 | WS2812B-B | LED_WS2812B-B | U3 |
| 2 | ~ | TI_SO-PowerPAD-8_ThermalVias | U7, U8 |
| 3 | Q_NMOS_GSD | SOT-23 | Q1, Q8, Q9 |
| 3 | PMOS | PowerPAK_SO-8_Single | Q3, Q4, Q10 |
| 2 | XT60PW-F | AMASS_XT60PW-F_1x02_P7.20mm_Horizontal | J1, J7 |
| 1 | CONN_01X02_PIN Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 2 | CONN_01X05_SOCKET Conn_01x05_Socket | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J3, J12 |
| 1 | XT60PW-M | AMASS_XT60PW-M_1x02_P7.20mm_Horizontal | J4 |
| 2 | CONN_01X04_SOCKET Conn_01x04_Socket | PinHeader_1x04_P2.54mm_Vertical | J5, J14 |
| 1 | CONN_01X04_SOCKET Conn_01x04_Socket | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J6 |
| 4 | CONN_01X03_PIN Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J8, J9, J10, J11 |
| 1 | USB4145-03-0170-C_REVA2 | GCT_USB4145-03-0170-C_REVA2 | J13 |
| 2 | Buzzer | Buzzer_12x9.5RM7.6 | BZ1, BZ3 |
| 1 | OFF | SW_Push_1P1T_NO_Vertical_Wuerth_434133025816 | SW1 |
| 1 | ON | SW_Push_1P1T_NO_Vertical_Wuerth_434133025816 | SW2 |
| 4 | D | D_SOD-123F | D1, D2, D3, D4 |
| 1 | SP0503BAHTG | SOT-143 | D5 |
| 1 | SMF17A | D_SOD-123F | D6 |
Show 20 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LED | LED_0603_1608Metric | D7 |
| 1 | 10U 10u | L_Wurth_WE-LQSH-2010 | L1 |
| 2 | 100U 100u | L_Taiyo-Yuden_NR-60xx | L2, L3 |
| 1 | 1u | C_0402_1005Metric | C1 |
| 1 | 22U 22u | C_0603_1608Metric | C2 |
| 2 | 0.1U 0.1u | C_0402_1005Metric | C3, C5 |
| 3 | 10U 10u | C_0805_2012Metric | C4, C6, C7 |
| 2 | 22UF 22uF | C_0603_1608Metric | C11, C13 |
| 2 | 2.2U 2.2u | C_0603_1608Metric | C12, C14 |
| 1 | .1u | C_0402_1005Metric | C15 |
| 2 | DNP | R_0402_1005Metric | R1, R2 |
| 1 | 61.9K 61.9k | R_0402_1005Metric | R3 |
| 1 | 20K 20k | R_0402_1005Metric | R4 |
| 4 | 10K 10k | R_0402_1005Metric | R5, R8, R14, R20 |
| 6 | 5.1K 5.1k | R_0402_1005Metric | R6, R7, R10, R11, R12, R13 |
| 1 | 330 | R_0402_1005Metric | R9 |
| 2 | 3.01K 3.01k | R_0402_1005Metric | R16, R18 |
| 2 | 33.2K 33.2k | R_0402_1005Metric | R17, R19 |
| 1 | 1M | R_0402_1005Metric | R25 |
| 1 | 100K 100k | R_0402_1005Metric | R26 |
148-winter-2025-final project team-11 design files
The KiCad project lives in the UCSD-Silberman-Classes-and-Projects/148-winter-2025-final-project-team-11 repository on GitHub; these links point at the commit this page was built from.
148-winter-2025-final project team-11: common questions
What microcontroller does the 148-winter-2025-final project team-11 use?
The 148-winter-2025-final project team-11 is built around the ESP32-S3-MINI-1-N8, from the ESP32 family.
How big is the 148-winter-2025-final project team-11 PCB?
The 148-winter-2025-final project team-11 measures 67 × 77.5 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the 148-winter-2025-final project team-11?
72 components, from 40 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the 148-winter-2025-final project team-11 design files?
From the UCSD-Silberman-Classes-and-Projects/148-winter-2025-final-project-team-11 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the 148-winter-2025-final project team-11 design in my own project?
The repository has no license, so all rights stay with UCSD-Silberman-Classes-and-Projects. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the 148-winter-2025-final project team-11 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k