RECEIVER

UltraInstinct21·Kicad_Projects·2.TRANSMITTER_RECEIVER/RECEIVER/RECEIVER.kicad_pcb

RECEIVER PCB layout, top view — open source AVR/Arduino board by UltraInstinct21

About the RECEIVER PCB

RECEIVER is an open source AVR/Arduino PCB design by UltraInstinct21, published on GitHub. It is a 2-layer board measuring 53.1 × 79 mm, with 11 components from 5 distinct parts.

Its main chip is the Arduino_Nano_v3.x, from the AVR/Arduino family. Other key parts include the AMS1117 and NRF24L01_Breakout. By type, the board carries 7 connectors, 2 ICs, 1 module and 1 capacitor.

From the project

Beginner kicad projects

1. Buck Converter To convert 24V to 12V , 5V 2A and 3.3V 2A.

2. Transmitter and Receiver A 7-channel transmitter and receiver using NRF24L01 and Arduino Nano.

Main components on the RECEIVER

RECEIVER bill of materials (BOM)

11 components, 5 distinct parts.

QtyPartRefs
1
AMS1117
U1
1
NRF24L01_Breakout
U2
1
Arduino_Nano_v3.x
A1
7
Conn_01x03_Pin
J1, J2, J3, J4, J5, J6, J7
1
C
C1

RECEIVER design files

The KiCad project lives in the UltraInstinct21/Kicad_Projects repository on GitHub; these links point at the commit this page was built from.

RECEIVER: common questions

What microcontroller does the RECEIVER use?

The RECEIVER is built around the Arduino_Nano_v3.x, from the AVR/Arduino family.

How big is the RECEIVER PCB?

The RECEIVER measures 53.1 × 79 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the RECEIVER?

11 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the RECEIVER design files?

From the UltraInstinct21/Kicad_Projects repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the RECEIVER design in my own project?

The repository has no license, so all rights stay with UltraInstinct21. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the RECEIVER without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in Kicad_Projects

Similar boards