Buck conveter
UltraInstinct21·Kicad_Projects·1.BUCK_CONVERTER/Buck_conveter.kicad_pcb
About the Buck conveter PCB
Buck conveter is an open source PCB design by UltraInstinct21, published on GitHub. It is a 2-layer board measuring 92.7 × 43.2 mm, with 22 components from 12 distinct parts.
Other key parts include the LM2596T-12, LM2596S-5 and LM2596S-ADJ. By type, the board carries 6 capacitors, 4 connectors, 3 ICs, 3 diodes, 3 inductors and 3 resistors.
It belongs with the power & battery designs in this gallery.
From the project
Beginner kicad projects
1. Buck Converter To convert 24V to 12V , 5V 2A and 3.3V 2A.
2. Transmitter and Receiver A 7-channel transmitter and receiver using NRF24L01 and Arduino Nano.
Main components on the Buck conveter
Buck conveter bill of materials (BOM)
22 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM2596T-12 | TO-220-5_P3.4x3.7mm_StaggerOdd_Lead3.8mm_Vertical | U1 |
| 1 | LM2596S-5 | TO-263-5_TabPin3 | U2 |
| 1 | LM2596S-ADJ | TO-263-5_TabPin3 | U3 |
| 4 | 282837-2 | 2pin_screwterminal | P1, P2, P3, P4 |
| 3 | 1N5822 | D_DO-201AD_P15.24mm_Horizontal | D1, D2, D3 |
| 3 | 33µH | L_Axial_L5.0mm_D3.6mm_P10.00mm_Horizontal_Murata_BL01RN1A2A2 | L1, L2, L3 |
| 1 | 220u | C_Axial_L5.1mm_D3.1mm_P15.00mm_Horizontal | C1 |
| 3 | 330μF | C_Axial_L5.1mm_D3.1mm_P15.00mm_Horizontal | C2, C4, C6 |
| 2 | 220μF | C_Axial_L5.1mm_D3.1mm_P15.00mm_Horizontal | C3, C5 |
| 1 | 1kΩ | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 1.7kΩ | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 5Ω | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
Buck conveter design files
The KiCad project lives in the UltraInstinct21/Kicad_Projects repository on GitHub; these links point at the commit this page was built from.
Buck conveter: common questions
How big is the Buck conveter PCB?
The Buck conveter measures 92.7 × 43.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Buck conveter?
22 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the Buck conveter design files?
From the UltraInstinct21/Kicad_Projects repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Buck conveter design in my own project?
The repository has no license, so all rights stay with UltraInstinct21. Use it as a reference, and ask the author before reusing the design.
More boards in Kicad_Projects
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k