Emmc tester
About the Emmc tester PCB
Emmc tester is an open source PCB design by umn-impish, published on GitHub under the MPL-2.0 license. It is a 2-layer board measuring 45.5 × 20.3 mm, with 10 components from 5 distinct parts.
By type, the board carries 5 resistors, 1 IC, 1 connector and 1 capacitor.
From the project
kicad files for the IMPISH piggyback
Emmc tester bill of materials (BOM)
10 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | 100-ball eMMC | U1 |
| 1 | Micro_SD_Card | microsd | J1 |
| 2 | 2.2u | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | CVcc1, CVccq1 |
| 1 | 1u | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1 |
| 5 | 50k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R3, R4, R5 |
Emmc tester design files
The KiCad project lives in the umn-impish/kicad repository on GitHub; these links point at the commit this page was built from.
Emmc tester: common questions
How big is the Emmc tester PCB?
The Emmc tester measures 45.5 × 20.3 mm, has 2 copper layers and is 0.8 mm thick.
How many components are on the Emmc tester?
10 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the Emmc tester design files?
From the umn-impish/kicad repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Emmc tester design in my own project?
Yes, under the terms of its MPL-2.0 license, which umn-impish chose for the repository.
More boards in kicad
Raspberry PiFlight Computer Carrier
90 × 90 mm139 parts4LMPL-2.01
Mezzanine
90 × 90 mm125 parts2LMPL-2.01
GRiPM Bubba Bias Supply
90 × 90 mm104 parts2LMPL-2.01
IMPISH PS Toggles Board
90 × 90 mm83 parts4LMPL-2.01
Peak holder
70 × 38 mm73 parts4LMPL-2.01
Tia csp test board
70 × 52 mm54 parts4LMPL-2.01
Sipm carrier
95 × 50 mm54 parts2LMPL-2.01
IMPISH POWER SUPPLY MAIN BOARD
90 × 90 mm39 parts2LMPL-2.01
Gripm pcb v2
23.3 × 60 mm27 parts2LMPL-2.01
Lvps toggles adapter
90 × 90 mm17 parts2LMPL-2.01