Lvps toggles adapter
About the Lvps toggles adapter PCB
Lvps toggles adapter is an open source PCB design by umn-impish, published on GitHub under the MPL-2.0 license. It is a 2-layer board measuring 90 × 90 mm, with 17 components from 17 distinct parts.
From the project
kicad files for the IMPISH piggyback
Lvps toggles adapter bill of materials (BOM)
17 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Toggle 1 in | PinHeader_1x08_P2.54mm_Vertical | J1 |
| 1 | Toggle 2 in | PinHeader_1x08_P2.54mm_Vertical | J2 |
| 1 | Toggle 3 in | PinHeader_1x08_P2.54mm_Vertical | J3 |
| 1 | Toggle 4 in | PinHeader_1x08_P2.54mm_Vertical | J4 |
| 1 | Bias in | PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | BCS-110-L-D-TE | SAMTEC_BCS-110-L-D-TE | J7 |
| 1 | bias out | MOLEX_5031750400 | J8 |
| 1 | Sense passthrough | PinHeader_2x04_P2.54mm_Vertical | J9 |
| 1 | Heater + DAQBOX | PinSocket_2x04_P2.54mm_Vertical | J10 |
| 1 | tog1 out | MOLEX_5031750400 | J14 |
| 1 | Heat1 | PinHeader_2x01_P2.54mm_Vertical | J15 |
| 1 | Heat2 | PinHeader_2x01_P2.54mm_Vertical | J16 |
| 1 | Heat3 | PinHeader_2x01_P2.54mm_Vertical | J17 |
| 1 | DAQBOX out | PinHeader_2x01_P2.54mm_Vertical | J18 |
| 1 | tog2 out | MOLEX_5031750400 | J19 |
| 1 | tog3 out | MOLEX_5031750400 | J20 |
| 1 | tog4 out | MOLEX_5031750400 | J21 |
Lvps toggles adapter design files
The KiCad project lives in the umn-impish/kicad repository on GitHub; these links point at the commit this page was built from.
Lvps toggles adapter: common questions
How big is the Lvps toggles adapter PCB?
The Lvps toggles adapter measures 90 × 90 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Lvps toggles adapter?
17 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the Lvps toggles adapter design files?
From the umn-impish/kicad repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Lvps toggles adapter design in my own project?
Yes, under the terms of its MPL-2.0 license, which umn-impish chose for the repository.
More boards in kicad
Raspberry PiFlight Computer Carrier
90 × 90 mm139 parts4LMPL-2.01
Mezzanine
90 × 90 mm125 parts2LMPL-2.01
GRiPM Bubba Bias Supply
90 × 90 mm104 parts2LMPL-2.01
IMPISH PS Toggles Board
90 × 90 mm83 parts4LMPL-2.01
Peak holder
70 × 38 mm73 parts4LMPL-2.01
Sipm carrier
95 × 50 mm54 parts2LMPL-2.01
Tia csp test board
70 × 52 mm54 parts4LMPL-2.01
IMPISH POWER SUPPLY MAIN BOARD
90 × 90 mm39 parts2LMPL-2.01
Gripm pcb v2
23.3 × 60 mm27 parts2LMPL-2.01
Emmc tester
45.5 × 20.3 mm10 parts2LMPL-2.01