IMPISH POWER SUPPLY MAIN BOARD
About the IMPISH POWER SUPPLY MAIN BOARD
IMPISH POWER SUPPLY MAIN BOARD is an open source PCB design by umn-impish, published on GitHub under the MPL-2.0 license. It is a 2-layer board measuring 90 × 90 mm, with 39 components from 18 distinct parts.
Other key parts include the PXG-M15-24WS05, CCG30-24-12S, PXC-M03-24WD15-A, PXC-M03-24WS05-A and PXG-M15-24WD05. By type, the board carries 25 capacitors, 6 ICs, 5 inductors, 1 connector and 1 diode.
It belongs with the power & battery designs in this gallery.
From the project
kicad files for the IMPISH piggyback
Main components on the IMPISH POWER SUPPLY MAIN BOARD
IMPISH POWER SUPPLY MAIN BOARD bill of materials (BOM)
39 components, 18 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PXG-M15-24WS05 | CONV_PXG-M15-24WS05 | U1 |
| 1 | CCG30-24-12S | CONV_CCG30-24-12S | U2 |
| 1 | PXC-M03-24WD15-A | CONV_PXC-M03-24WD15-A | U3 |
| 1 | PXC-M03-24WS05-A | CONV_PXC-M03-24WS05-A | U4 |
| 1 | PXG-M15-24WD05 | CONV_PXG-M15-24WD05 | U5 |
| 1 | AM5TW-2407D-RZ | CONV_AM5TW-2407D-RZ | U6 |
| 1 | BCS-117-L-D-TE | SAMTEC_BCS-117-L-D-TE | J5 |
| 1 | F4804A-RG | FIL_F4804A-RG | FL1 |
| 1 | V8PAL50-M3/I | CR_DO-221BC_VIS | D1 |
| 1 | SRN6045-150M 15uH | L_Bourns_SRN6045TA | L1 |
| 2 | SDS680R-224M 220uH | SDS680R-105M | L2, L5 |
| 1 | SDS680R-104M 100uH | SDS680R-105M | L3 |
| 1 | SDS680R-103M 10uH | SDS680R-105M | L4 |
| 2 | DE2B3SA101KN3AY02F 100pF | CAP_DE2B3SA101KN3AY02F | C1, C21 |
| 4 | T495X106K050ATE300 10uF 50V | T495X106K050ATE300 | C2, C3, C22, C23 |
| 12 | C0805C103K2RECAUTO .01uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C5, C10, C11, C14, C15, C18, C19 +4 |
| 5 | T495X156K050ATE300 15uF 50V | T495X156K050ATE300 | C7, C8, C9, C28, C29 |
| 2 | T495D475K050ATE275 4.7uF 50V | T495D475K050ATE275 | C13, C17 |
IMPISH POWER SUPPLY MAIN BOARD design files
The KiCad project lives in the umn-impish/kicad repository on GitHub; these links point at the commit this page was built from.
IMPISH POWER SUPPLY MAIN BOARD: common questions
How big is the IMPISH POWER SUPPLY MAIN BOARD?
The IMPISH POWER SUPPLY MAIN BOARD measures 90 × 90 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the IMPISH POWER SUPPLY MAIN BOARD?
39 components, from 18 distinct parts. The full bill of materials is listed on this page.
Where can I download the IMPISH POWER SUPPLY MAIN BOARD design files?
From the umn-impish/kicad repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the IMPISH POWER SUPPLY MAIN BOARD design in my own project?
Yes, under the terms of its MPL-2.0 license, which umn-impish chose for the repository.
More boards in kicad
Raspberry PiFlight Computer Carrier
90 × 90 mm139 parts4LMPL-2.01
Mezzanine
90 × 90 mm125 parts2LMPL-2.01
GRiPM Bubba Bias Supply
90 × 90 mm104 parts2LMPL-2.01
IMPISH PS Toggles Board
90 × 90 mm83 parts4LMPL-2.01
Peak holder
70 × 38 mm73 parts4LMPL-2.01
Tia csp test board
70 × 52 mm54 parts4LMPL-2.01
Sipm carrier
95 × 50 mm54 parts2LMPL-2.01
Gripm pcb v2
23.3 × 60 mm27 parts2LMPL-2.01
Lvps toggles adapter
90 × 90 mm17 parts2LMPL-2.01
Emmc tester
45.5 × 20.3 mm10 parts2LMPL-2.01
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0k
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
Module 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k