Flight Computer Carrier
About the Flight Computer Carrier PCB
Flight Computer Carrier is an open source Raspberry Pi PCB design by umn-impish, published on GitHub under the MPL-2.0 license. It is a 4-layer board measuring 90 × 90 mm, with 139 components from 57 distinct parts.
Its main chip is the rpi-cm4, from the Raspberry Pi family. Other key parts include the 74LVC1G07SE-7, PCT2075TP_147, MAX11617EEE+, DS3231M+TRL and TLV9004QPWRQ1. By type, the board carries 52 capacitors, 41 resistors, 12 connectors, 8 ICs, 7 inductors and 6 diodes.
From the project
kicad files for the IMPISH piggyback
Main components on the Flight Computer Carrier
Flight Computer Carrier bill of materials (BOM)
139 components, 57 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74LVC1G07SE-7 | 74LVC1G07SE_7 | U1 |
| 1 | PCT2075TP_147 | PCT2075TP_147 | U2 |
| 1 | MAX11617EEE+ | MAX11617EEE+ | U3 |
| 1 | DS3231M+TRL | DS3231M_TRL | U4 |
| 1 | TLV9004QPWRQ1 | TLV9004QPWRQ1 | U5 |
| 1 | ADS122C04IPWR | ADS122C04IPWR | U6 |
| 1 | LTC2983ILX-PBF | LTC2983ILX-PBF | U7 |
| 1 | LAN7430T-I/Y9X | LAN7430T-I-Y9X | U8 |
| 1 | DSC1001CI2-025.0000T | DSC1001CI2-025-0000T | Y1 |
| 5 | M80-5000442 | M80_5000442 | J1, J2, J3, J4, J5 |
| 1 | MTSW-104-13-L-D-1060 | PinSocket_2x04_P2.54mm_Vertical | J6 |
| 1 | AMPHENOL_10103594-0001LF | 10103594-0001LF | J8 |
| 1 | MTSW-110-13-L-D-1060 | SAMTEC_BCS-110-L-D-TE | J10 |
| 1 | 0734151471 | MMCX_Molex_73415-1471_Vertical | J11 |
| 1 | 74981104402 | 74981104402 | J12 |
| 1 | BCS-110-L-D-TE | SAMTEC_BCS-110-L-D-TE | J15 |
| 1 | Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J16 |
| 10 | BAS7002VH6327XTSA1 | BAS7002VH6327XTSA1 | CR1, CR2, CR3, CR4, CR5, CR6, CR7, CR8 +2 |
| 1 | rpi-cm4 | rpi-cm4 | Module1 |
| 1 | SM91509AL-E | SM91509AL-E | T1 |
Show 37 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LTST-S270KRKT | LED_0603_1608Metric | D1 |
| 2 | LTST-S270KGKT | LED_0603_1608Metric | D2, D3 |
| 1 | LTST-S270KSKT | LED_0603_1608Metric | D4 |
| 2 | MBRA130LT3G | D_SMA | D5, D6 |
| 6 | 220R | L_0805_2012Metric | FB1, FB2, FB3, FB4, FB5, FB6 |
| 1 | 3.3u | VLS3012HBX-3R3M | L1 |
| 4 | 10u | C_1206_3216Metric | C1, C2, C18, C20 |
| 1 | 100p | C_1206_3216Metric | C3 |
| 6 | 10n | C_1206_3216Metric | C4, C5, C21, C22, C23, C24 |
| 9 | 0.1u | C_1206_3216Metric | C6, C8, C9, C10, C11, C13, C15, C16 +1 |
| 3 | 1u | C_1206_3216Metric | C7, C12, C14 |
| 1 | 10u, X5R | C_1206_3216Metric | C19 |
| 21 | 0.1u | C_0805_2012Metric | C25, C26, C28, C29, C30, C33, C35, C36 +13 |
| 4 | 10u | C_0805_2012Metric | C27, C31, C39, C42 |
| 2 | 1u | C_0805_2012Metric | C32, C40 |
| 1 | 4.7u | C_0805_2012Metric | C34 |
| 1 | 100 | R_1206_3216Metric | R1 |
| 2 | 5k | R_1206_3216Metric | R2, R3 |
| 2 | 75 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R6, R8 |
| 3 | 1k | R_1206_3216Metric | R7, R9, R14 |
| 2 | 470 | R_1206_3216Metric | R10, R11 |
| 1 | 2k | R_1206_3216Metric | R12 |
| 1 | 10k | R_1206_3216Metric | R13 |
| 9 | 1M | R_1206_3216Metric | R15, R16, R20, R23, R24, R27, R28, R32 +1 |
| 2 | 71.5k | R_1206_3216Metric | R17, R25 |
| 2 | 162k | R_1206_3216Metric | R18, R29 |
| 4 | 249k | R_1206_3216Metric | R19, R26, R34, R35 |
| 2 | 4.87k | R_1206_3216Metric | R21, R22 |
| 1 | 90.9k | R_1206_3216Metric | R30 |
| 1 | 4.99k | R_1206_3216Metric | R31 |
| 1 | 5.1k | R_1206_3216Metric | R36 |
| 1 | PTS0805M1B500RP100 | PTS0805M1B500RP100 | R37 |
| 2 | 0 | R_0805_2012Metric | R38, R39 |
| 1 | 200 | R_0805_2012Metric | R40 |
| 1 | 6.04k | R_0805_2012Metric | R41 |
| 1 | 10k | R_0805_2012Metric | R42 |
| 1 | 330 | R_0805_2012Metric | R43 |
Flight Computer Carrier design files
The KiCad project lives in the umn-impish/kicad repository on GitHub; these links point at the commit this page was built from.
- Layoutfc-board/fc-board.kicad_pcb
- Schematicfc-board/fc-board.kicad_sch
Flight Computer Carrier: common questions
What microcontroller does the Flight Computer Carrier use?
The Flight Computer Carrier is built around the rpi-cm4, from the Raspberry Pi family.
How big is the Flight Computer Carrier PCB?
The Flight Computer Carrier measures 90 × 90 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Flight Computer Carrier?
139 components, from 57 distinct parts. The full bill of materials is listed on this page.
Where can I download the Flight Computer Carrier design files?
From the umn-impish/kicad repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Flight Computer Carrier design in my own project?
Yes, under the terms of its MPL-2.0 license, which umn-impish chose for the repository.
Can I test firmware for the Flight Computer Carrier without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.
More boards in kicad
Mezzanine
90 × 90 mm125 parts2LMPL-2.01
GRiPM Bubba Bias Supply
90 × 90 mm104 parts2LMPL-2.01
IMPISH PS Toggles Board
90 × 90 mm83 parts4LMPL-2.01
Peak holder
70 × 38 mm73 parts4LMPL-2.01
Sipm carrier
95 × 50 mm54 parts2LMPL-2.01
Tia csp test board
70 × 52 mm54 parts4LMPL-2.01
IMPISH POWER SUPPLY MAIN BOARD
90 × 90 mm39 parts2LMPL-2.01
Gripm pcb v2
23.3 × 60 mm27 parts2LMPL-2.01
Lvps toggles adapter
90 × 90 mm17 parts2LMPL-2.01
Emmc tester
45.5 × 20.3 mm10 parts2LMPL-2.01
Similar boards
Raspberry PiOpen source rover
nasa-jpl
220 × 178 mm144 parts2LApache-2.09.7k
Raspberry PiIot
dotnet
56 × 65 mm24 parts2LMIT2.4k
Raspberry PiSPIRIT
SPIRIT-org
82 × 155 mm130 parts6LCERN-OHL-S-2.01.3k
Raspberry PiCM5RevEng
schlae
55 × 40 mm417 parts10LNo license1.0k
Raspberry PiHaxo hw
cardonabits
102.4 × 211.3 mm38 parts2LCustom license672
Raspberry PiPhased
Neumi
75 × 100 mm71 parts2LNo license507