IMPISH PS Toggles Board
About the IMPISH PS Toggles Board
IMPISH PS Toggles Board is an open source PCB design by umn-impish, published on GitHub under the MPL-2.0 license. It is a 4-layer board measuring 90 × 90 mm, with 83 components from 20 distinct parts.
Other key parts include the BSP742T, AP22804AW5-7 and BSP452. By type, the board carries 40 resistors, 15 transistors, 12 capacitors, 9 connectors and 7 ICs.
From the project
kicad files for the IMPISH piggyback
Main components on the IMPISH PS Toggles Board
IMPISH PS Toggles Board bill of materials (BOM)
83 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | BSP742T Infineon Technologies | SOIC127P600X175-8N-21 | U1, U13 |
| 4 | AP22804AW5-7 | SOT95P285X140-5N | U3, U6, U9, U12 |
| 1 | BSP452 Infineon Technologies | SOT230P700X180-4N-3-V | U14 |
| 5 | MMBT3904Q-7-F MMBT3904Q | SOT-23 | Q4, Q10, Q16, Q22, Q25 |
| 5 | MMBT3906Q-7-F MMBT3906Q | SOT-23 | Q5, Q11, Q17, Q23, Q26 |
| 5 | ZXM61N02FTA ZXM61N02F | SOT-23 | Q6, Q12, Q18, Q24, Q27 |
| 1 | MTSW-117-12-L-D-840 MTSW-117-09-G-D-100 | SAMTEC_MTSW-117-X-X-D-X1 | J1 |
| 1 | BCS-110-L-D-TE | SAMTEC_BCS-110-L-D-TE | J2 |
| 4 | BCS-110-L-D-TE | SAMTEC_BCS-110-L-D-TE | J3, J4, J5, J6 |
| 2 | BCS-105-L-D-TE | SAMTEC_BCS-105-L-D-TE | J7, J8 |
| 1 | Sense | PinSocket_2x04_P2.54mm_Vertical | J9 |
| 4 | C0805C103K2RECAUTO 10n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4 |
| 4 | C0805C103K2RECAUTO .1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8, C10, C12, C14 |
| 4 | C0805C103K2RECAUTO 1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C16, C18, C20, C22 |
| 10 | PAT0805E1002BST1 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11, R13, R31, R33, R51, R53, R71, R73 +2 |
| 10 | PAT0805E2001BST1 2k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12, R14, R32, R34, R52, R54, R72, R74 +2 |
| 14 | PAT0805E1001BST1 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R15, R17, R18, R35, R37, R38, R55, R57 +6 |
| 4 | PAT0805E1003BST1 100k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R16, R36, R56, R76 |
| 1 | PAT0805E4701BST1 4.7k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R82 |
| 1 | PAT0805E10R0BST1 10 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R84 |
IMPISH PS Toggles Board design files
The KiCad project lives in the umn-impish/kicad repository on GitHub; these links point at the commit this page was built from.
IMPISH PS Toggles Board: common questions
How big is the IMPISH PS Toggles Board?
The IMPISH PS Toggles Board measures 90 × 90 mm, has 4 copper layers and is 1.6062 mm thick.
How many components are on the IMPISH PS Toggles Board?
83 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the IMPISH PS Toggles Board design files?
From the umn-impish/kicad repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the IMPISH PS Toggles Board design in my own project?
Yes, under the terms of its MPL-2.0 license, which umn-impish chose for the repository.
More boards in kicad
Raspberry PiFlight Computer Carrier
90 × 90 mm139 parts4LMPL-2.01
Mezzanine
90 × 90 mm125 parts2LMPL-2.01
GRiPM Bubba Bias Supply
90 × 90 mm104 parts2LMPL-2.01
Peak holder
70 × 38 mm73 parts4LMPL-2.01
Sipm carrier
95 × 50 mm54 parts2LMPL-2.01
Tia csp test board
70 × 52 mm54 parts4LMPL-2.01
IMPISH POWER SUPPLY MAIN BOARD
90 × 90 mm39 parts2LMPL-2.01
Gripm pcb v2
23.3 × 60 mm27 parts2LMPL-2.01
Lvps toggles adapter
90 × 90 mm17 parts2LMPL-2.01
Emmc tester
45.5 × 20.3 mm10 parts2LMPL-2.01