Pcb mini racecar
umut181·pcb-mini-racecar
About the Pcb mini racecar
Pcb mini racecar is an open source PCB design by umut181, published on GitHub. It is a 4-layer board measuring 96.4 × 80.6 mm, with 58 components from 19 distinct parts.
Other key parts include the LM2596S-5 and IR2104. By type, the board carries 16 capacitors, 13 diodes, 10 resistors, 8 transistors, 5 ICs and 1 connector.
It belongs with the power & battery and robotics & motion designs in this gallery.
From the project
A custom PCB design for a 2WD, IR-controlled differential-drive robot vehicle. Built to run on 2S–6S LiPo battery input, drive 5 V-based microcontrollers, and power low-reduction TT motors: all on a single compact board.
A custom electronics board for a 2WD, IR-controlled racecar robot, designed in KiCad.
The board combines a buck-style power stage (inductor + Schottky + electrolytic caps) to step the LiPo input down for logic rails, and a dual full H-bridge built from discrete IRF540N MOSFETs (driven via IR2104 half-bridge drivers) to independently control two DC motors for differential steering. IR receiver pins bring in the remote-control signal.
Main components on the Pcb mini racecar
Pcb mini racecar bill of materials (BOM)
58 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM2596S-5 | TO-263-5_TabPin3 | U1 |
| 4 | IR2104 | DIP-8_W7.62mm | U2, U3, U5, U7 |
| 8 | IRF540N | TO-220-3_Vertical | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 |
| 1 | ~ | PinHeader_1x07_P2.54mm_Vertical | J1 |
| 1 | ~ | PinSocket_1x03_P2.54mm_Vertical | IR_pins1 |
| 3 | ~ | TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | Input1, MOT1, MOT2 |
| 1 | 5A_Schottky | D_DO-201AD_P5.08mm_Vertical_AnodeUp | D1 |
| 8 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D2, D3, D4, D5, D6, D10, D11, D12 |
| 4 | MURS260 | D_SMB_Handsoldering | D7, D8, D9, D13 |
| 1 | 33u | L_Radial_D7.8mm_P5.00mm_Fastron_07HCP | L1 |
| 1 | 100u | CP_Axial_L11.0mm_D5.0mm_P18.00mm_Horizontal | C1 |
| 1 | 220u | CP_Axial_L11.0mm_D6.0mm_P18.00mm_Horizontal | C2 |
| 4 | 0.47u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4, C11, C14 |
| 4 | 0.1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C6, C10, C16 |
| 2 | 1u | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C7, C13 |
| 2 | 10u | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C8, C15 |
| 2 | 470u | C_Axial_L12.0mm_D8.5mm_P15.00mm_Horizontal | C9, C12 |
| 8 | 10 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R6, R7, R9, R10 |
| 2 | 0.1 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R8 |
Pcb mini racecar design files
The KiCad project lives in the umut181/pcb-mini-racecar repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb.kicad_pcb
Pcb mini racecar: common questions
How big is the Pcb mini racecar?
The Pcb mini racecar measures 96.4 × 80.6 mm, has 4 copper layers and is 1.600198 mm thick.
How many components are on the Pcb mini racecar?
58 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pcb mini racecar design files?
From the umut181/pcb-mini-racecar repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Pcb mini racecar design in my own project?
The repository has no license, so all rights stay with umut181. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k