19 open source boards using the TL431
Real designs built with the TL431, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
UVerter
owntech-foundation
178.9 × 131.8 mm317 parts4LCERN-OHL-S-2.0112NXP
VehicleController
UNCAMotorsports
99.1 × 57.2 mm139 parts2LMIT2RackZ80 PowerSupply
jkreucher
160 × 100 mm53 parts2LGPL-3.02OpAmpPassXsistorBenchSupply
cellularmitosis
99.7 × 99.7 mm87 parts2LMIT112V-1A-Isolated-Flyback-SMPS
gorkemguven
125.2 × 47.5 mm49 parts2LMIT1EVD80 MCU
Alexandr-Filatov
236 × 150 mm746 parts6LNo license0Main
yminp
148.6 × 82 mm156 parts2LCERN-OHL-W-2.00Instru bab v2 full
trublion
110 × 85 mm141 parts2LMIT0AC-DC PowerSupply
SalihAyvaci21
142.2 × 113.8 mm135 parts2LNo license0ESP32
Matter light diver
haxeko
95 × 30 mm99 parts2LNo license0Thermocouple sensor-AD8495-breakout hardware design
SolderedElectronics
22 × 38 mm15 parts2LTAPR-OHL-1.00Power supply
romavis
163 × 130 mm168 parts2LCC-BY-SA-4.07NXP
VehicleControllerwut
UNCAMotorsports
99.1 × 57.2 mm139 parts2LMIT2Instru bab v2 main
trublion
110 × 85 mm129 parts2LMIT0Battery
trollectronics
50 × 10 mm20 parts2LNo license22Cutoff
ayoy
52 × 42.5 mm13 parts2LNo license2Feron lb019
minamonra
198 × 53 mm52 parts2LNo license0Master uscita-L
dj-filippo241
100 × 220 mm153 parts4LNo license2TremFreak
kanengomibako
54 × 47 mm49 parts2LUnlicense11
How designs wire the TL431
Read from the KiCad layouts of 17 open source designs, one per repository: what each pin of the TL431 connects to, and the resistors, capacitors and other passives placed on it.
- The REF pin has a series resistor on 11 of 17 designs, most often 10 kΩ (then 1 kΩ).
- The A pins have a series resistor on 10 of 17 designs, most often 3.9 kΩ (then 10 kΩ).
- The A pins have a series capacitor on 7 of 17 designs, most often 100 nF (then 470 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| REFpin 1 | Connected to: Signal 76% · VREF 24% |
|
| Apin 2, 3 | Connected to: Signal 53% · GND 38% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include UVerter by owntech-foundation, Battery by trollectronics, TremFreak by kanengomibako and Power supply by romavis.
The TL431 in open source designs
The gallery holds 19 open source boards using the TL431 from 17 GitHub repositories; a typical one measures about 110 × 82 mm and carries around 129 components.
84% are two-layer designs, the rest use four layers or more, and 63% carry an open source license.
The most starred is UVerter by owntech-foundation.
Parts used alongside the TL431
What boards using the TL431 are built for
TL431: common questions
Where can I find a TL431 reference design?
Each of the 19 boards on this page is a real design using the TL431. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the TL431 REF pin?
The REF pin has a series resistor on 11 of 17 designs, most often 10 kΩ (then 1 kΩ). Counted from the KiCad layouts of 17 open source designs using the TL431.
What resistor goes on the TL431 A pin?
The A pins have a series resistor on 10 of 17 designs, most often 3.9 kΩ (then 10 kΩ). Counted from the KiCad layouts of 17 open source designs using the TL431.
What parts are used alongside the TL431?
The LM358, TL072, LM2903, R-78E5.0-1.0 and TL071 appear in the most repositories here.
Which microcontrollers do boards using the TL431 use?
Most are built on NXP (2) and ESP32 (1).
How big is a typical board using the TL431?
The median is 110 × 82 mm, and 84% are two-layer designs.
What is the most popular open source board using the TL431?
By GitHub stars, UVerter by owntech-foundation, with 112 stars.
Can I simulate one of these boards using the TL431 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.