Mumble
unixbigot·mumble
About the Mumble PCB
Mumble is an open source ESP32 PCB design by unixbigot, published on GitHub. It is a 2-layer board measuring 100 × 30 mm, with 63 components from 35 distinct parts.
Its main chip is the ESP32-WROOM, from the ESP32 family. Other key parts include the TP4054, AP2204K-3.3 and DRV8834. By type, the board carries 22 resistors, 16 capacitors, 6 connectors, 6 switches, 5 ICs and 3 diodes.
It belongs with the robotics & motion and power & battery designs in this gallery.
From the project
A miniature battery-powered 2D plotter controller
Mumble is a board for the ESP32 port of GRBL, targetted at low-voltage stepper motors. It was designed for the Minigraph CNC sticker plotter, but is intended to be usable for other CNC experiments.
It exposes all the GRBL pins, and has three DRV8834 low-votage motor drivers on-board. Unlike the more popular A4988, the DRV8834 operates from motor voltage in the range 3v to 10.8v, making it suitable for low-voltage miniature steppers.
Main components on the Mumble
Mumble bill of materials (BOM)
63 components, 35 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TP4054 | SOT-23-5_HandSoldering | U1 |
| 1 | ESP32-WROOM | ESP32-WROOM | U2 |
| 1 | AP2204K-3.3 | SOT-23-5 | U3 |
| 2 | DRV8834 | HTSSOP-24 | U4, U5 |
| 2 | IRLML9301 | SOT-23 | Q1, Q2 |
| 1 | Serial | PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | Servo | Pin_Header_Straight_1x03_Pitch2.54mm | J2 |
| 1 | VM sel | Pin_Header_Straight_1x03_Pitch2.54mm | J3 |
| 1 | X_MOT | Pin_Header_Straight_1x04_Pitch2.54mm | J11 |
| 1 | Z_MOT | Pin_Header_Straight_1x04_Pitch2.54mm | J16 |
| 1 | USB_B_Micro | USB_Micro | J101 |
| 1 | Battery | JST_EH_B02B-EH-A_02x2.50mm_Straight | BT101 |
| 2 | 10k | Potentiometer_Trimmer-EVM3E | RV1, RV2 |
| 1 | SW_SPST | CherryPowerSwitch | SW1 |
| 1 | Reset | TVBM02 | SW2 |
| 1 | Hold Button | TVBM02 | SW3 |
| 1 | Start Button | TVBM02 | SW4 |
| 1 | Abort Button | TVBM02 | SW5 |
| 1 | Program | TVBM02 | SW6 |
| 2 | LED | LED_0805_2012Metric | D101, D102 |
Show 15 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CHRG | LED_0805_2012Metric | D103 |
| 2 | 0.1uF | C_0805_HandSoldering | C1, C5 |
| 2 | 1uF | C_0805_HandSoldering | C2, C3 |
| 4 | 10uF | C_0805_HandSoldering | C4, C6, C8, C14 |
| 2 | 4.7uF | C_0805_HandSoldering | C7, C12 |
| 2 | 2.2uF | C_0805_HandSoldering | C9, C16 |
| 2 | 100uF | CP_Radial_D5.0mm_P2.50mm | C10, C18 |
| 2 | 0.01uF | C_0805_HandSoldering | C11, C20 |
| 7 | 10k | R_0805_HandSoldering | R1, R2, R3, R4, R5, R7, R11 |
| 1 | 1.2K | R_0805_HandSoldering | R6 |
| 4 | 47k | R_0805_HandSoldering | R8, R9, R14, R16 |
| 1 | 50k | R_0805_HandSoldering | R10 |
| 4 | 0.1R | R_1206 | R12, R13, R18, R19 |
| 3 | 330 | R_0805_HandSoldering | R101, R102, R103 |
| 2 | 47k | R_0805_2012Metric | R104, R105 |
Mumble design files
The KiCad project lives in the unixbigot/mumble repository on GitHub; these links point at the commit this page was built from.
- Layoutmumble.kicad_pcb
Mumble: common questions
What microcontroller does the Mumble use?
The Mumble is built around the ESP32-WROOM, from the ESP32 family.
How big is the Mumble PCB?
The Mumble measures 100 × 30 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Mumble?
63 components, from 35 distinct parts. The full bill of materials is listed on this page.
Where can I download the Mumble design files?
From the unixbigot/mumble repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Mumble design in my own project?
The repository has no license, so all rights stay with unixbigot. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Mumble without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k