SquidTX-Nano-ELRS
unixvoid·SquidTX-Nano-ELRS·hardware/squidtx_nano.kicad_pcb
About the SquidTX-Nano-ELRS PCB
SquidTX-Nano-ELRS is an open source ESP32 PCB design by unixvoid, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 20 × 35.5 mm, with 15 components from 14 distinct parts.
Its main chip is the ESP32-WROOM-32E, from the ESP32 family. Other key parts include the TPS63802DLAR. By type, the board carries 4 capacitors, 4 resistors, 2 ICs, 2 connectors and 1 inductor.
It belongs with the power & battery and rf & radio designs in this gallery.
From the project
Nano ELRS TX designed for the DIY 2400 E28 ELRS target. Includes internal boost converter 1.3v-5.5v input
SquidTX Nano is a small 2.4Ghz ELRS TX board. It features an ESP32-WROOM-32E and an SX1280 and runs the stock ExpressLRS DIY 2400 E28 target. An onboard TPS63802 buck-boost takes 1.3 V to 5.5 V and makes 3.3 V, so the board runs straight off a 1S battery. I designed this to fit in a TBS Tango 2, but it'll work with anything.
The KiCad files, gerbers and photos are in this repo so you can build one.

Main components on the SquidTX-Nano-ELRS
SquidTX-Nano-ELRS bill of materials (BOM)
15 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-WROOM-32E | ESP32-WROOM-32D | U1 |
| 1 | TPS63802DLAR | TPS63802DLAR | U2 |
| 1 | INPUTS | PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | Fan | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | ~ | E28-2G4M27S | E28-2G4M27S1 |
| 1 | SQUIDGRIP | squidgrip | SG1 |
| 1 | .47uH | L_1210_3225Metric | L1 |
| 1 | 4.7uF | C_0805_2012Metric | C1 |
| 1 | .1uF | C_0805_2012Metric | C2 |
| 1 | 10uF | C_0805_2012Metric | C3 |
| 1 | 22uF | C_0805_2012Metric | C4 |
| 2 | 10k | R_0805_2012Metric | R1, R4 |
| 1 | 100k | R_0805_2012Metric | R2 |
| 1 | 56k | R_0805_2012Metric | R3 |
SquidTX-Nano-ELRS design files
The KiCad project lives in the unixvoid/SquidTX-Nano-ELRS repository on GitHub; these links point at the commit this page was built from.
SquidTX-Nano-ELRS: common questions
What microcontroller does the SquidTX-Nano-ELRS use?
The SquidTX-Nano-ELRS is built around the ESP32-WROOM-32E, from the ESP32 family.
How big is the SquidTX-Nano-ELRS PCB?
The SquidTX-Nano-ELRS measures 20 × 35.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SquidTX-Nano-ELRS?
15 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the SquidTX-Nano-ELRS design files?
From the unixvoid/SquidTX-Nano-ELRS repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the SquidTX-Nano-ELRS design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which unixvoid chose for the repository.
Can I test firmware for the SquidTX-Nano-ELRS without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k