Stock-Ticker-Hardware

UnsignedArduino·Stock-Ticker-Hardware

Stock-Ticker-Hardware PCB layout, top view — open source Raspberry Pi board by UnsignedArduino

About the Stock-Ticker-Hardware PCB

Stock-Ticker-Hardware is an open source Raspberry Pi PCB design by UnsignedArduino, published on GitHub. It is a 2-layer board measuring 60 × 50 mm, with 15 components from 11 distinct parts.

Its main chip is the RaspberryPi_Pico_W, from the Raspberry Pi family. Other key parts include the 74AHCT125. By type, the board carries 6 connectors, 4 capacitors, 2 resistors, 1 IC, 1 module and 1 switch.

It belongs with the displays & leds designs in this gallery.

From the project

Hardware for a stock ticker that displays the prices of stocks on a long line of MAX7219 LED matrices with a Pico 2W from Alpaca Markets!

Main components on the Stock-Ticker-Hardware

Stock-Ticker-Hardware bill of materials (BOM)

15 components, 11 distinct parts.

QtyPartRefs
1
74AHCT125
U1
1
RaspberryPi_Pico_W
A1
1
Conn_01x05_Socket
J1
1
Conn_01x03_Pin
J2
1
Conn_01x03_Socket
J3
3
Conn_01x02_Pin
J4, J5, J6
1
SW_Push
SW1
3
0.1 μF
C1, C2, C4
1
10 μF
C3
1
10 kΩ
R1
1
1 kΩ
R2

Stock-Ticker-Hardware design files

The KiCad project lives in the UnsignedArduino/Stock-Ticker-Hardware repository on GitHub; these links point at the commit this page was built from.

Stock-Ticker-Hardware: common questions

What microcontroller does the Stock-Ticker-Hardware use?

The Stock-Ticker-Hardware is built around the RaspberryPi_Pico_W, from the Raspberry Pi family.

How big is the Stock-Ticker-Hardware PCB?

The Stock-Ticker-Hardware measures 60 × 50 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Stock-Ticker-Hardware?

15 components, from 11 distinct parts. The full bill of materials is listed on this page.

Where can I download the Stock-Ticker-Hardware design files?

From the UnsignedArduino/Stock-Ticker-Hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Stock-Ticker-Hardware design in my own project?

The repository has no license, so all rights stay with UnsignedArduino. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Stock-Ticker-Hardware without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.

Similar boards