Gateway
urlenbayev·summer2023·hardware/Gateway.kicad_pcb
About the Gateway PCB
Gateway is an open source Nordic nRF PCB design by urlenbayev, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 38.3 × 58.9 mm, with 13 components from 9 distinct parts.
Its main chip is the BMD-301-A-R, from the Nordic nRF family. By type, the board carries 9 capacitors, 2 connectors and 1 IC.
It belongs with the iot & wireless designs in this gallery.
From the project
This project was completed for a course at Aalto University and its problem was proposed by Granlund OY. It focuses on the development and implementation of an Internet of Things (IoT) device designed to monitor structural parameters of network base stations, often located in rem
This project was completed for a course at Aalto University and its problem was proposed by Granlund OY. It focuses on the development and implementation of an Internet of Things (IoT) device designed to monitor structural parameters of network base stations, often located in remote and hard-to-reach areas. The device was developed during Aalto University’s Protopaja course with the aim is to digitize and automate the monitoring and analysis of various structures, products, and services. The primary objective was to create an energy-efficient, long-lasting IoT device capable of measuring the…
Main components on the Gateway
Gateway bill of materials (BOM)
13 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BMD-301-A-R | BMD-301-A-R | U1 |
| 1 | Conn_01x16_Socket | PinSocket_1x16_P2.54mm_Vertical | J1 |
| 1 | Conn_01x12_Socket | PinSocket_1x12_P2.54mm_Vertical | J2 |
| 1 | TC2030-IDC | Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | TC1 |
| 1 | 100u | C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C1 |
| 2 | 10u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C5 |
| 2 | 1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C6 |
| 2 | 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C7 |
| 2 | 12p | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8, C9 |
Gateway design files
The KiCad project lives in the urlenbayev/summer2023 repository on GitHub; these links point at the commit this page was built from.
- Layouthardware/Gateway.kicad_pcb
- Schematichardware/Gateway.kicad_sch
Gateway: common questions
What microcontroller does the Gateway use?
The Gateway is built around the BMD-301-A-R, from the Nordic nRF family.
How big is the Gateway PCB?
The Gateway measures 38.3 × 58.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Gateway?
13 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the Gateway design files?
From the urlenbayev/summer2023 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Gateway design in my own project?
Yes, under the terms of its GPL-3.0 license, which urlenbayev chose for the repository.
Can I test firmware for the Gateway without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.
More boards in summer2023
Similar boards
Nordic nRF
Keyboard
byrantech
262.5 × 109.6 mm206 parts2LMIT4.3kNordic nRF
TOTEM
GEIGEIGEIST
258.8 × 94.4 mm85 parts2LCERN-OHL-P-2.02.0kNordic nRF
Pixl.js
solosky
40 × 23 mm45 parts4LGPL-2.01.4kNordic nRF
Board hl15-latest
dennisss
61 × 37 mm14 parts2LApache-2.0381Nordic nRF
Management
dennisss
101 × 31.5 mm50 parts2LApache-2.0381Nordic nRF
Board
dennisss
363 × 128 mm420 parts4LApache-2.0381