Temperature

urlenbayev·summer2023·hardware/temperature.kicad_pcb

Temperature PCB layout, top view — open source Nordic nRF board by urlenbayev

About the Temperature PCB

Temperature is an open source Nordic nRF PCB design by urlenbayev, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 48 × 44.2 mm, with 15 components from 9 distinct parts.

Its main chip is the BMD-301-A-R, from the Nordic nRF family. Other key parts include the MCP9808T-E/MS. By type, the board carries 6 capacitors, 5 resistors, 2 ICs and 1 battery holder.

It belongs with the iot & wireless and sensors designs in this gallery.

From the project

This project was completed for a course at Aalto University and its problem was proposed by Granlund OY. It focuses on the development and implementation of an Internet of Things (IoT) device designed to monitor structural parameters of network base stations, often located in rem

This project was completed for a course at Aalto University and its problem was proposed by Granlund OY. It focuses on the development and implementation of an Internet of Things (IoT) device designed to monitor structural parameters of network base stations, often located in remote and hard-to-reach areas. The device was developed during Aalto University’s Protopaja course with the aim is to digitize and automate the monitoring and analysis of various structures, products, and services. The primary objective was to create an energy-efficient, long-lasting IoT device capable of measuring the…

Main components on the Temperature

BMD-301-A-RMCP9808T-E/MS

Temperature bill of materials (BOM)

15 components, 9 distinct parts.

QtyPartRefs
1
BMD-301-A-R
U1
1
MCP9808T-E/MS
U2
1
BRX1-2477-SM
BT2
1
TC2030-IDC
TC2
1
10u
C1
2
1u
C2, C6
1
100n
C3
2
12p
C4, C5
5
4.7k
R6, R7, R8, R9, R10

Temperature design files

The KiCad project lives in the urlenbayev/summer2023 repository on GitHub; these links point at the commit this page was built from.

Temperature: common questions

What microcontroller does the Temperature use?

The Temperature is built around the BMD-301-A-R, from the Nordic nRF family.

How big is the Temperature PCB?

The Temperature measures 48 × 44.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Temperature?

15 components, from 9 distinct parts. The full bill of materials is listed on this page.

Where can I download the Temperature design files?

From the urlenbayev/summer2023 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Temperature design in my own project?

Yes, under the terms of its GPL-3.0 license, which urlenbayev chose for the repository.

Can I test firmware for the Temperature without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.

More boards in summer2023

Similar boards