9dof sensor

urlenbayev·summer2023·hardware/9dof_sensor.kicad_pcb

9dof sensor PCB layout, top view — open source Nordic nRF board by urlenbayev

About the 9dof sensor PCB

9dof sensor is an open source Nordic nRF PCB design by urlenbayev, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 47.8 × 47 mm, with 20 components from 12 distinct parts.

Its main chip is the BMD-301-A-R, from the Nordic nRF family. Other key parts include the ICM-20948 and TPS76918. By type, the board carries 9 capacitors, 4 resistors, 3 ICs, 2 transistors and 1 battery holder.

It belongs with the iot & wireless and sensors designs in this gallery.

From the project

This project was completed for a course at Aalto University and its problem was proposed by Granlund OY. It focuses on the development and implementation of an Internet of Things (IoT) device designed to monitor structural parameters of network base stations, often located in rem

This project was completed for a course at Aalto University and its problem was proposed by Granlund OY. It focuses on the development and implementation of an Internet of Things (IoT) device designed to monitor structural parameters of network base stations, often located in remote and hard-to-reach areas. The device was developed during Aalto University’s Protopaja course with the aim is to digitize and automate the monitoring and analysis of various structures, products, and services. The primary objective was to create an energy-efficient, long-lasting IoT device capable of measuring the…

Main components on the 9dof sensor

ICM-20948BMD-301-A-RTPS76918

9dof sensor bill of materials (BOM)

20 components, 12 distinct parts.

QtyPartRefs
1
ICM-20948
U1
1
BMD-301-A-R
U2
1
TPS76918
U3
2
BSS138
Q1, Q2
1
BRX1-2477-SM
BT1
1
TC2030-IDC
TC1
2
0.1u
C1, C3
3
1u
C2, C5, C9
1
10u
C4
1
100n
C6
2
12p
C7, C8
4
4.7k
R3, R4, R5, R6

9dof sensor design files

The KiCad project lives in the urlenbayev/summer2023 repository on GitHub; these links point at the commit this page was built from.

9dof sensor: common questions

What microcontroller does the 9dof sensor use?

The 9dof sensor is built around the BMD-301-A-R, from the Nordic nRF family.

How big is the 9dof sensor PCB?

The 9dof sensor measures 47.8 × 47 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the 9dof sensor?

20 components, from 12 distinct parts. The full bill of materials is listed on this page.

Where can I download the 9dof sensor design files?

From the urlenbayev/summer2023 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the 9dof sensor design in my own project?

Yes, under the terms of its GPL-3.0 license, which urlenbayev chose for the repository.

Can I test firmware for the 9dof sensor without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.

More boards in summer2023

Similar boards