${DOC TYPE} Document

UVicRocketry·A3-Sensors-DAQ·Flight-Hardware/conversion_pcb/conversion_pcb/conversion_pcb.kicad_pcb

${DOC TYPE} Document PCB layout, top view — open source STM32 board by UVicRocketry

About the ${DOC TYPE} Document PCB

${DOC TYPE} Document is an open source STM32 PCB design by UVicRocketry, published on GitHub. It is a 4-layer board measuring 38.1 × 73.1 mm, with 105 components from 34 distinct parts.

Its main chip is the STM32G431RBTx, from the STM32 family. Other key parts include the MCP1825S, MCP1754S-3302xDB, MCP3564R, TCAN3414DR and max4208aua+t. By type, the board carries 43 resistors, 41 capacitors, 8 ICs, 7 connectors, 3 diodes and 1 crystal.

It belongs with the sensors designs in this gallery.

From the project

A3-Sensors-DAQ This is a repository for Anduril 3's Sensors and Data Acquisition system. This repository contains files for both PCB hardware and STM32 software. ## Repository structure The repository has the following structure: ROOT | Flight Code | ---- Platformio | --------src

A3-Sensors-DAQ This is a repository for Anduril 3's Sensors and Data Acquisition system. This repository contains files for both PCB hardware and STM32 software. ## Repository structure The repository has the following structure: ROOT | Flight Code | ---- Platformio | --------src | ------------ system (autogenerated from STM32 CubeMX) | ------------ tasks (custom code) | Flight Hardware (KiCad project for flight hardware) | Software Development (any testing or data analysis scripts) | Hardware Development (breakout boards) | ---- Transceiver | ---- ADC | Release Notes (all features currently…

Main components on the ${DOC TYPE} Document

STM32G431RBTxMCP1825SMCP1754S-3302xDBMCP3564RTCAN3414DRmax4208aua+t

${DOC TYPE} Document bill of materials (BOM)

105 components, 34 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32G431RBTx
U1
1
MCP1825S
U2
1
MCP1754S-3302xDB
U3
1
MCP3564R
U4
1
TCAN3414DR
U7
3
max4208aua+t
U8, U9, U10
1
Crystal_GND24
Y1
1
Conn_02x02_Odd_Even
J1
3
Conn_01x02_Pin
J2, J3, J6
2
~
J4, J5
1
Conn_01x02_Pin
J7
1
1825910-6
SW1
2
RED
D1, D2
1
CUHS20F30
D3
1
120R
FB1
2
12p
C1, C3
6
10u
C2, C23, C37, C38, C39, C40
13
100n
C4, C5, C6, C7, C8, C12, C14, C16 +5
6
1u
C9, C10, C19, C21, C35, C36
4
10u+
C11, C13, C15, C17
Show 14 more
QtyPartRefs
4
3.3n
C24, C25, C26, C28
3
1n
C29, C30, C31
3
10u
C32, C33, C34
4
4.7k
R1, R2, R45, R46
6
100
R4, R7, R8, R9, R10, R11
5
1.1K
R14, R15, R16, R41, R42
2
60
R17, R18
6
5.1K
R19, R20, R21, R22, R23, R24
3
1.1K
R25, R26, R27
3
100K
R28, R29, R30
9
360
R31, R32, R33, R47, R48, R49, R56, R57 +1
2
10k
R34, R35
1
1.55k
R40
2
5.1K
R43, R44

${DOC TYPE} Document design files

The KiCad project lives in the UVicRocketry/A3-Sensors-DAQ repository on GitHub; these links point at the commit this page was built from.

${DOC TYPE} Document: common questions

What microcontroller does the ${DOC TYPE} Document use?

The ${DOC TYPE} Document is built around the STM32G431RBTx, from the STM32 family.

How big is the ${DOC TYPE} Document PCB?

The ${DOC TYPE} Document measures 38.1 × 73.1 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the ${DOC TYPE} Document?

105 components, from 34 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the ${DOC TYPE} Document design files?

From the UVicRocketry/A3-Sensors-DAQ repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the ${DOC TYPE} Document design in my own project?

The repository has no license, so all rights stay with UVicRocketry. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the ${DOC TYPE} Document without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in A3-Sensors-DAQ

Similar boards