Transciever Breakout
UVicRocketry·A3-Sensors-DAQ·Hardware-Development/Transciever_Breakout/Transciever_Breakout.kicad_pcb
About the Transciever Breakout
Transciever Breakout is an open source PCB design by UVicRocketry, published on GitHub. It is a 2-layer board measuring 31.8 × 31.8 mm, with 21 components from 15 distinct parts.
Other key parts include the MCP2562-E-SN, AZ1117CH2-1.8 and MCP1792x-5002xDB. By type, the board carries 6 capacitors, 6 resistors, 4 diodes, 3 ICs and 2 connectors.
It belongs with the sensors and dev boards & breakouts designs in this gallery.
From the project
A3-Sensors-DAQ This is a repository for Anduril 3's Sensors and Data Acquisition system. This repository contains files for both PCB hardware and STM32 software. ## Repository structure The repository has the following structure: ROOT | Flight Code | ---- Platformio | --------src
A3-Sensors-DAQ This is a repository for Anduril 3's Sensors and Data Acquisition system. This repository contains files for both PCB hardware and STM32 software. ## Repository structure The repository has the following structure: ROOT | Flight Code | ---- Platformio | --------src | ------------ system (autogenerated from STM32 CubeMX) | ------------ tasks (custom code) | Flight Hardware (KiCad project for flight hardware) | Software Development (any testing or data analysis scripts) | Hardware Development (breakout boards) | ---- Transceiver | ---- ADC | Release Notes (all features currently…
Main components on the Transciever Breakout
Transciever Breakout bill of materials (BOM)
21 components, 15 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP2562-E-SN | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | AZ1117CH2-1.8 | SOT-223-3_TabPin2 | U2 |
| 1 | MCP1792x-5002xDB | SOT-223-3_TabPin2 | U3 |
| 1 | USB_C_Receptacle_PowerOnly_6P | USB_C_Receptacle_GCT_USB4135-GF-A_6P_TopMnt_Horizontal | J1 |
| 1 | Conn_01x05_Pin | PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | VBUS | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | 1.8V | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2 |
| 1 | 5V | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D3 |
| 1 | 1N4001 | D_DO-41_SOD81_P10.16mm_Horizontal | D4 |
| 2 | 0.1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2 |
| 2 | 2.2uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4 |
| 2 | 1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5, C6 |
| 1 | 120 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
| 3 | 1k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2, R3, R4 |
| 2 | 5.1k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5, R6 |
Transciever Breakout design files
The KiCad project lives in the UVicRocketry/A3-Sensors-DAQ repository on GitHub; these links point at the commit this page was built from.
Transciever Breakout: common questions
How big is the Transciever Breakout?
The Transciever Breakout measures 31.8 × 31.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Transciever Breakout?
21 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Transciever Breakout design files?
From the UVicRocketry/A3-Sensors-DAQ repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Transciever Breakout design in my own project?
The repository has no license, so all rights stay with UVicRocketry. Use it as a reference, and ask the author before reusing the design.
More boards in A3-Sensors-DAQ
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k