6 open source boards using the TCAN3414DR

Real designs built with the TCAN3414DR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the TCAN3414DR

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the TCAN3414DR connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC_3 pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 10 µF).
  • The CANL_6 pin has a series resistor on 5 of 6 designs, most often 59 Ω (then 0 Ω).
  • The CANH_7 pin has a series resistor on 4 of 6 designs, most often 59 Ω (then 0 Ω).
GND_2pin 2Connected to: GND 100%
VCC_3pin 3Connected to: 3.3V 83% · a signal 17%
  • Decoupling capacitor on 100% · 100 nF (6), 10 µF (4)
CANL_6pin 6Connected to: A connector 50%
  • Series resistor on 83% · 59 Ω (2), 0 Ω (2), 60.4 Ω (1)
CANH_7pin 7Connected to: A connector 50%
  • Series resistor on 67% · 59 Ω (2), 0 Ω (2), 120 Ω (1)

4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include TET-Module by ICDT-Inatel-Cubesat-Design-Team, LIONv3-R by RodrigoCAndrade, LIONv3-Mini by RodrigoCAndrade and Stm32h7-renode reference platform by antmicro.

The TCAN3414DR in open source designs

The gallery holds 6 open source boards using the TCAN3414DR from 6 GitHub repositories; a typical one measures about 50.2 × 66.5 mm and carries around 79 components.

100% use four copper layers or more, and 50% carry an open source license.

The most starred is TET-Module by ICDT-Inatel-Cubesat-Design-Team.

Microcontrollers on boards using the TCAN3414DR

What boards using the TCAN3414DR are built for

TCAN3414DR: common questions

Where can I find a TCAN3414DR reference design?

Each of the 6 boards on this page is a real design using the TCAN3414DR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the TCAN3414DR VCC_3 pin?

The VCC_3 pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 6 open source designs using the TCAN3414DR.

What resistor goes on the TCAN3414DR CANL_6 pin?

The CANL_6 pin has a series resistor on 5 of 6 designs, most often 59 Ω (then 0 Ω). Counted from the KiCad layouts of 6 open source designs using the TCAN3414DR.

What resistor goes on the TCAN3414DR CANH_7 pin?

The CANH_7 pin has a series resistor on 4 of 6 designs, most often 59 Ω (then 0 Ω). Counted from the KiCad layouts of 6 open source designs using the TCAN3414DR.

What parts are used alongside the TCAN3414DR?

The E80-900M2213S, INA226AIDGSR, TMP112AIDRLR, USBLC6-2SC6 and ESP32-C6-MINI-1-N4 appear in the most repositories here.

Which microcontrollers do boards using the TCAN3414DR use?

Most are built on STM32 (4) and ESP32 (2).

How big is a typical board using the TCAN3414DR?

The median is 50.2 × 66.5 mm, and 0% are two-layer designs.

What is the most popular open source board using the TCAN3414DR?

By GitHub stars, TET-Module by ICDT-Inatel-Cubesat-Design-Team, with 5 stars.

Can I simulate one of these boards using the TCAN3414DR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part