HardLabs

Dash Left

uvmaero·AERO_Boards·Dash/Dash_Left/Dash_Left.kicad_pcb

Dash Left PCB layout, top view — open source AVR/Arduino board by uvmaero

About the Dash Left PCB

Dash Left is an open source AVR/Arduino PCB design by uvmaero, published on GitHub. It is a 2-layer board measuring 86.4 × 76.2 mm, with 42 components from 21 distinct parts.

Its main chip is the ATmega328P-AU, from the AVR/Arduino family. Other key parts include the R-785.0-1.0, RC1602A, STP16CP05, MCP2515-xSO and MCP2551-I-SN. By type, the board carries 17 resistors, 8 capacitors, 6 ICs, 5 diodes, 3 connectors and 1 crystal.

From the project

All the Boards We Make

Main components on the Dash Left

ATmega328P-AUR-785.0-1.0RC1602ASTP16CP05MCP2515-xSOMCP2551-I-SN

Dash Left bill of materials (BOM)

42 components, 21 distinct parts.

QtyPartRefs
1
ATmega328P-AU
U1
1
R-785.0-1.0
U2
1
RC1602A
U3
1
STP16CP05
U4
1
MCP2515-xSO
U5
1
MCP2551-I-SN
U6
1
16MHz
Y1
1
Conn_01x04
J1
1
Conn_02x03_Odd_Even
J2
1
Conn_01x02
J3
1
MF-MSMF050
F1
1
10K TRIM
RV1
1
LED
D1
4
LED_RGBA
D2, D3, D4, D5
6
0.1u
C1, C2, C4, C6, C7, C8
1
1u
C3
1
10u
C5
13
330
R1, R6, R7, R8, R9, R10, R11, R12 +5
2
10K
R2, R4
1
1K
R3
Show 1 more
QtyPartRefs
1
120
R5

Dash Left design files

The KiCad project lives in the uvmaero/AERO_Boards repository on GitHub; these links point at the commit this page was built from.

Dash Left: common questions

What microcontroller does the Dash Left use?

The Dash Left is built around the ATmega328P-AU, from the AVR/Arduino family.

How big is the Dash Left PCB?

The Dash Left measures 86.4 × 76.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Dash Left?

42 components, from 21 distinct parts. The full bill of materials is listed on this page.

Where can I download the Dash Left design files?

From the uvmaero/AERO_Boards repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Dash Left design in my own project?

The repository has no license, so all rights stay with uvmaero. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Dash Left without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in AERO_Boards

Similar boards