PedalBaord
About the PedalBaord PCB
PedalBaord is an open source AVR/Arduino PCB design by uvmaero, published on GitHub. It is a 2-layer board measuring 61 × 32.2 mm, with 22 components from 16 distinct parts.
Its main chip is the ATmega328P-AU, from the AVR/Arduino family. Other key parts include the R-785.0-1.0, MCP2515-xSO, MCP2551-I-SN and MCP3008. By type, the board carries 7 capacitors, 5 ICs, 5 resistors, 2 connectors, 1 crystal and 1 fuse.
From the project
All the Boards We Make
Main components on the PedalBaord
PedalBaord bill of materials (BOM)
22 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATmega328P-AU | TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | R-785.0-1.0 | Converter_DCDC_RECOM_R-78E-0.5_THT | U2 |
| 1 | MCP2515-xSO | SOIC-18W_7.5x11.6mm_P1.27mm | U3 |
| 1 | MCP2551-I-SN | SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | MCP3008 | SOIC-16_3.9x9.9mm_P1.27mm | U5 |
| 1 | 16MHz | Resonator_SMD_muRata_CSTxExxV-3Pin_3.0x1.1mm_HandSoldering | Y1 |
| 1 | Conn_02x03_Odd_Even | PinHeader_2x03_P2.54mm_Vertical | J1 |
| 1 | Conn_01x23 | TE_1-770669-1_23pin_Horizontal | J2 |
| 1 | MF-MSMF050 | Fuse_1812_4532Metric_Pad1.30x3.40mm_HandSolder | F1 |
| 1 | LED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 5 | 0.1u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C5, C6, C7 |
| 1 | 1u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3 |
| 1 | 10u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4 |
| 3 | 10K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R4 |
| 1 | 330 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 120 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
PedalBaord design files
The KiCad project lives in the uvmaero/AERO_Boards repository on GitHub; these links point at the commit this page was built from.
PedalBaord: common questions
What microcontroller does the PedalBaord use?
The PedalBaord is built around the ATmega328P-AU, from the AVR/Arduino family.
How big is the PedalBaord PCB?
The PedalBaord measures 61 × 32.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PedalBaord?
22 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the PedalBaord design files?
From the uvmaero/AERO_Boards repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the PedalBaord design in my own project?
The repository has no license, so all rights stay with uvmaero. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the PedalBaord without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in AERO_Boards
AVR/ArduinoDash Left
86.4 × 76.2 mm42 parts2LNo license1
AVR/ArduinoFaultLatcher
42.6 × 56.3 mm39 parts2LNo license1
AVR/ArduinoDash Right
78.7 × 69.2 mm34 parts2LNo license1
HV DCDC
134.6 × 96.5 mm30 parts2LNo license1
AVR/ArduinoDaqBoard
61 × 41.3 mm25 parts2LNo license1
Pacman2020
99.7 × 68 mm25 parts2LNo license1
AVR/ArduinoDemo
27.9 × 21.6 mm16 parts2LNo license1
TSAL
57.2 × 31.1 mm16 parts2LNo license1
LVPDU
97.8 × 52.1 mm12 parts2LNo license1
60V IND
18.2 × 23.9 mm6 parts2LNo license1
Emrax Breakout
35.6 × 29.2 mm3 parts2LNo license1
Similar boards
AVR/ArduinoMagspoof
samyk
35 × 29 mm11 parts2LNo license4.2k
AVR/ArduinoRedox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0k
AVR/ArduinoLabrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2k
AVR/ArduinoV4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoModuleV450
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoDiscipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k