Ar

v1peridae·v1permodsynth·ar/ar/ar.kicad_pcb

Ar PCB layout, top view — open source PIC board by v1peridae

About the Ar PCB

Ar is an open source PIC PCB design by v1peridae, published on GitHub. It is a 2-layer board measuring 86 × 38.2 mm, with 27 components from 17 distinct parts.

Its main chip is the PIC12F683-xSN, from the PIC family. Other key parts include the L7805 and TL072. By type, the board carries 9 resistors, 8 capacitors, 3 ICs, 3 diodes and 2 connectors.

It belongs with the test & measurement designs in this gallery.

From the project

- A modular sythesiser is an electronic music instrument made of different sythesiser modules! (who wouldve guessed) - They look something like this:

- A modular sythesiser is an electronic music instrument made of different sythesiser modules! (who wouldve guessed) - They look something like this:

credits to https://www.bartonmusicalcircuits.com/ which is where i learnt how to do all of this :)

casing - it currently doesnt have a case but i have all the measurements and hope to build a wooden or hard cardboard case

Ar, from the project README
From the project README

Main components on the Ar

PIC12F683-xSNL7805TL072

Ar bill of materials (BOM)

27 components, 17 distinct parts.

QtyPartRefs
1
PIC12F683-xSN
U1
1
L7805
U2
1
TL072
U3
1
Conn_01x10_Pin
J1
1
AudioJack4
J2
2
B100K
ATTACK1, DECAY1
1
1N4148
D1
1
D_Schottky
D2
1
LED
D3
2
10uF
C1, C3
5
0.01uF
C2, C4, C5, C7, C8
1
0.1uF
C6
2
10
R1, R2
3
100K
R3, R4, R5
2
1K
R6, R7
1
33K
R8
1
100K
RN1

Ar design files

The KiCad project lives in the v1peridae/v1permodsynth repository on GitHub; these links point at the commit this page was built from.

Ar: common questions

What microcontroller does the Ar use?

The Ar is built around the PIC12F683-xSN, from the PIC family.

How big is the Ar PCB?

The Ar measures 86 × 38.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Ar?

27 components, from 17 distinct parts. The full bill of materials is listed on this page.

Where can I download the Ar design files?

From the v1peridae/v1permodsynth repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Ar design in my own project?

The repository has no license, so all rights stay with v1peridae. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Ar without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.

More boards in v1permodsynth

Similar boards