Squarevco
v1peridae·v1permodsynth·square-vco/squarevco.kicad_pcb
About the Squarevco PCB
Squarevco is an open source PIC PCB design by v1peridae, published on GitHub. It is a 2-layer board measuring 65.2 × 41.2 mm, with 40 components from 22 distinct parts.
Its main chip is the PIC12F683-xMC, from the PIC family. Other key parts include the TL074 and L7805. By type, the board carries 15 resistors, 9 capacitors, 6 ICs, 3 connectors, 2 diodes and 1 crystal.
It belongs with the test & measurement designs in this gallery.
From the project
- A modular sythesiser is an electronic music instrument made of different sythesiser modules! (who wouldve guessed) - They look something like this:
- A modular sythesiser is an electronic music instrument made of different sythesiser modules! (who wouldve guessed) - They look something like this:
credits to https://www.bartonmusicalcircuits.com/ which is where i learnt how to do all of this :)
casing - it currently doesnt have a case but i have all the measurements and hope to build a wooden or hard cardboard case
Main components on the Squarevco
Squarevco bill of materials (BOM)
40 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PIC12F683-xMC | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 4 | TL074 | SOIC-14_3.9x8.7mm_P1.27mm | U2, U4, U5, U6 |
| 1 | L7805 | SOT-223-3_TabPin2 | U3 |
| 1 | 20mhz | Crystal_SMD_5032-2Pin_5.0x3.2mm | Y1 |
| 1 | AudioJack4 | Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J1 |
| 1 | Conn_01x10_Pin | IDC-Header_2x05_P2.54mm_Horizontal | J4 |
| 1 | AudioJack3_SwitchT | Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J5 |
| 1 | TUNE | Potentiometer_Bourns_3269W_Vertical | 25K1 |
| 1 | COARSE | Potentiometer_Alpha_RD901F-40-00D_Single_Vertical | B100K1 |
| 1 | A100K | Potentiometer_Alpha_RD901F-40-00D_Single_Vertical | FCV1 |
| 1 | B100K | Potentiometer_Alpha_RD901F-40-00D_Single_Vertical | FINE1 |
| 2 | D_Schottky | D_SOD-123 | D1, D2 |
| 2 | 22pF | C_0805_2012Metric | C1, C9 |
| 1 | 1nF | C_0805_2012Metric | C2 |
| 4 | .01uF | C_0805_2012Metric | C3, C4, C5, C8 |
| 2 | 10uf | CP_Elec_5x5.4 | C6, C7 |
| 1 | 120K | R_0805_2012Metric | R1 |
| 8 | 100K | R_0805_2012Metric | R2, R5, R7, R8, R14, R16, R17, R18 |
| 2 | 1K | R_0805_2012Metric | R3, R4 |
| 1 | 1M | R_0805_2012Metric | R6 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 10 | R_0805_2012Metric | R10, R11 |
| 1 | 150K | R_0805_2012Metric | R19 |
Squarevco design files
The KiCad project lives in the v1peridae/v1permodsynth repository on GitHub; these links point at the commit this page was built from.
- Layoutsquare-vco/squarevco.kicad_pcb
- Schematicsquare-vco/squarevco.kicad_sch
Squarevco: common questions
What microcontroller does the Squarevco use?
The Squarevco is built around the PIC12F683-xMC, from the PIC family.
How big is the Squarevco PCB?
The Squarevco measures 65.2 × 41.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Squarevco?
40 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the Squarevco design files?
From the v1peridae/v1permodsynth repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Squarevco design in my own project?
The repository has no license, so all rights stay with v1peridae. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Squarevco without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.
More boards in v1permodsynth
Similar boards
PIC
Pslab hardware
fossasia
99 × 53.3 mm187 parts4LApache-2.01.7kPIC
Lens
ervanalb
80 × 80 mm53 parts4LNo license515PIC
Micro 8088
skiselev
152.4 × 101.6 mm71 partsGPL-3.0414PIC
GB-CART256K-A
Gekkio
51.4 × 61 mm17 parts2LCC-BY-4.0379PIC
GB-CARTPP-DIY
Gekkio
100 × 100 mm22 parts2LCC-BY-4.0379PIC
GB-LIVE32
Gekkio
51.4 × 61 mm46 parts4LCC-BY-4.0379