HardLabs

Air quality station

V3lectronics·air-quality-station·air-quality-kicad-files/air-quality-kicad-files.kicad_pcb

Air quality station PCB layout, top view — open source ESP32 board by V3lectronics

About the Air quality station PCB

Air quality station is an open source ESP32 PCB design by V3lectronics, published on GitHub. It is a 2-layer board measuring 76 × 40 mm, with 14 components from 9 distinct parts.

Its main chip is the XIAO-ESP32C3, from the ESP32 family. By type, the board carries 8 resistors, 4 ICs, 1 transistor and 1 speaker.

It belongs with the sensors, iot & wireless and displays & leds designs in this gallery.

From the project

V Electronics air quality station design files & code

- USB C power/programming (MCU fully unlocked) - 2x16 LCD display + vertical bar LCD color display - No battery (a powerbank can be used) - Not waterproof

- GRAVITY PM2.5 air quality sensor link > [!TODO] //find cheaper for example https://www.dfrobot.com/product-2526.html > [!NOTE] > Other sensors can be used as alternatives if you need more precise measurements.

Air quality station, from the project README
From the project README

Main components on the Air quality station

XIAO-ESP32C3

Air quality station bill of materials (BOM)

14 components, 9 distinct parts.

QtyPartRefs
1
~
U1
1
~
U2
1
~
U3
1
XIAO-ESP32C3
U4
1
2N3904
Q1
1
PS1240P02BT
LS1
6
~
R1, R2, R3, R4, R5, R6
1
~
R7
1
~
R8

Air quality station design files

The KiCad project lives in the V3lectronics/air-quality-station repository on GitHub; these links point at the commit this page was built from.

Air quality station: common questions

What microcontroller does the Air quality station use?

The Air quality station is built around the XIAO-ESP32C3, from the ESP32 family.

How big is the Air quality station PCB?

The Air quality station measures 76 × 40 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Air quality station?

14 components, from 9 distinct parts. The full bill of materials is listed on this page.

Where can I download the Air quality station design files?

From the V3lectronics/air-quality-station repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Air quality station design in my own project?

The repository has no license, so all rights stay with V3lectronics. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Air quality station without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards