Kv4p ht-PANEL

VanceVagell·kv4p-ht·pcb/KiCAD/kv4p-ht-PANEL/kv4p-ht-PANEL.kicad_pcb

Kv4p ht-PANEL PCB layout, top view — open source ESP32 board by VanceVagell

About the Kv4p ht-PANEL PCB

Kv4p ht-PANEL is an open source ESP32 PCB design by VanceVagell, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 81.2 × 96.6 mm, with 70 components from 36 distinct parts.

Its main chip is the ESP32-WROOM-32E-N4, from the ESP32 family. Other key parts include the AZ1117H-3.3TRG1 and CP2102N-A02-GQFN24. By type, the board carries 27 capacitors, 20 resistors, 4 connectors, 4 switches, 4 inductors and 3 ICs.

It belongs with the rf & radio designs in this gallery.

From the project

Open source handheld ham radio project KV4P-HT

Use Chrome. For some reason, the JLCPCB order process is broken for me on FireFox. Much sadness.

You'll need the following three files: *

Go to Click: "Add Gerber," and upload https://github.com/VanceVagell/kv4p-ht/blob/main/pcb/KiCAD/kv4p-ht/production/kv4pHT2.0c.zip * JLCPCB will ask you a bunch of questions about the file. The auto-loaded defaults are sufficient, but if you know you want to change something (solder mask color, etc) do it here.

Main components on the Kv4p ht-PANEL

Kv4p ht-PANEL bill of materials (BOM)

70 components, 36 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
AZ1117H-3.3TRG1
U2
1
CP2102N-A02-GQFN24
U4
1
ESP32-WROOM-32E-N4
U5
2
SS8050
Q1, Q2
1
AO3400A
Q3
1
C496551
Antenna
J1
1
SAO v.69bis
J4
1
C2894897
USB-C Socket
J5
1
GPIO Header
J6
2
100MA
100mA
F1, F2
2
C455252
PTT
SW1, SW2
1
C318884
Reset
SW3
1
C318884
Program
SW4
1
SK6812-EC20
D1
2
C2286
Red
D3, D4
1
BLM18KG102SN1D
Ferrite Bead, 1A
FB1
1
LQW2BAN27NJ00L
27nH
L1
1
LQW2BAN30NG00L
30nH
L2
1
LQW2BAN43NG00L
43nH
L3
1
Ya basic.
18pF
C1
Show 16 more
QtyPartRefs
2
C16133
100uF 6.3v
C2, C16
10
GCM1885C1H222FA16D
2.2nF Tuned VHF
Murata
C3, C8, C12, C13, C14, C15, C21, C22 +2
1
CC0402JRNPO9BN160
16pF
C4
1
Ya so basic.
10pF
C5
1
5.1PF
5.1pF
C6
3
100NF
100nF
C7, C11, C18
3
1UF
1uF
C9, C10, C17
2
10UF
10uF
C19, C20
1
2.7PF
2.7pF
C27
1
13PF
13pF
C29
1
11PF
11pF
C31
9
10K
10k
R1, R2, R9, R10, R11, R12, R13, R14 +1
5
1.2K
1.2k
R3, R6, R15, R18, R19
2
100R
R4, R5
2
5.1K
5.1k
R7, R8
2
100K
100k
R16, R21

Kv4p ht-PANEL design files

The KiCad project lives in the VanceVagell/kv4p-ht repository on GitHub; these links point at the commit this page was built from.

Kv4p ht-PANEL: common questions

What microcontroller does the Kv4p ht-PANEL use?

The Kv4p ht-PANEL is built around the ESP32-WROOM-32E-N4, from the ESP32 family.

How big is the Kv4p ht-PANEL PCB?

The Kv4p ht-PANEL measures 81.2 × 96.6 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Kv4p ht-PANEL?

70 components, from 36 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Kv4p ht-PANEL design files?

From the VanceVagell/kv4p-ht repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Kv4p ht-PANEL design in my own project?

Yes, under the terms of its GPL-3.0 license, which VanceVagell chose for the repository.

Can I test firmware for the Kv4p ht-PANEL without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in kv4p-ht

Similar boards