Deck-8
varaddorle007·deck-8·hardware/main/deck8.kicad_pcb
About the Deck-8 PCB
Deck-8 is an open source Nordic nRF PCB design by varaddorle007, published on GitHub under the MIT license. It is a 4-layer board measuring 92.8 × 76 mm, with 87 components from 48 distinct parts.
Its main chip is the Raytac MDBT50Q-1MV2, from the Nordic nRF family. Other key parts include the ST USBLC6-2SC6, TI BQ24074RGTT, TI TPS7A0533PDBVR, TI TPS22917DBVR and TI SN74LV1T125DBVR. By type, the board carries 27 capacitors, 20 resistors, 8 relays, 8 diodes, 7 ICs and 5 switches.
It belongs with the keyboards, iot & wireless and displays & leds designs in this gallery.
From the project
Open-source 8-key macro pad with 2 knobs, OLED and Bluetooth: PCB, case and ZMK firmware
main/deck8.kicadpro` is the project. Open it in KiCad 10. The files are written in the KiCad 9 format, which KiCad 10 opens and upgrades the first time you save.
The schematic and the board, routing included, are generated, so edit the scripts in tools/, not the KiCad files. KPY is KiCad's own Python, which ships pcbnew:
The whole chain takes about a minute and gives the same board every time. routepcb.py` discards all tracks, vias and its own zones, then routes again from the placement. It depends only on the placement, not on the order KiCad saves footprints in.
Main components on the Deck-8
Deck-8 bill of materials (BOM)
87 components, 48 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ST USBLC6-2SC6 USBLC6-2SC6 | SOT-23-6 | U1 |
| 1 | TI BQ24074RGTT BQ24074RGT | VQFN-16-1EP_3x3mm_P0.5mm_EP1.6x1.6mm_ThermalVias | U2 |
| 1 | TI TPS7A0533PDBVR TPS7A0533PDBV | SOT-23-5 | U3 |
| 1 | TI TPS22917DBVR TPS22917DBV | SOT-23-6 | U4 |
| 1 | Raytac MDBT50Q-1MV2 MDBT50Q-1MV2 | Raytac_MDBT50Q | U5 |
| 2 | TI SN74LV1T125DBVR SN74LV1T125 | SOT-23-5 | U6, U7 |
| 1 | Seiko SC-32S 32.768kHz 20ppm 9pF 32.768kHz 9pF | Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | HRO TYPE-C-31-M-12 USB-C | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | JST S2B-PH-SM4-TB(LF)(SN) LiPo 1000mAh | JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J2 |
| 1 | Joint Tech A1001WR-S-03P (JST SH compatible) LED STRIP | JST_SH_SM03B-SRSS-TB_1x03-1MP_P1.00mm_Horizontal | J4 |
| 1 | 0.96 in 128x64 I2C OLED module (SSD1306), soldered on its own 4-pin header OLED GND-VCC-SCL-SDA | PinHeader_1x04_P2.54mm_Vertical | J5 |
| 2 | Bourns PEC11R-4220F-S0024 PEC11R-4220F-S0024 | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | ENC1, ENC2 |
| 1 | Littelfuse 1206L050YR (6 V) 500mA hold | Fuse_1206_3216Metric | F1 |
| 1 | HanElectricity CPG151101S11-16 (MX hot-swap socket) KEY1 | SW_MX_Hotswap_Kailh_1u_NorthLED | K1 |
| 1 | HanElectricity CPG151101S11-16 (MX hot-swap socket) KEY2 | SW_MX_Hotswap_Kailh_1u_NorthLED | K2 |
| 1 | HanElectricity CPG151101S11-16 (MX hot-swap socket) KEY3 | SW_MX_Hotswap_Kailh_1u_NorthLED | K3 |
| 1 | HanElectricity CPG151101S11-16 (MX hot-swap socket) KEY4 | SW_MX_Hotswap_Kailh_1u_NorthLED | K4 |
| 1 | HanElectricity CPG151101S11-16 (MX hot-swap socket) KEY5 | SW_MX_Hotswap_Kailh_1u_NorthLED | K5 |
| 1 | HanElectricity CPG151101S11-16 (MX hot-swap socket) KEY6 | SW_MX_Hotswap_Kailh_1u_NorthLED | K6 |
| 1 | HanElectricity CPG151101S11-16 (MX hot-swap socket) KEY7 | SW_MX_Hotswap_Kailh_1u_NorthLED | K7 |
Show 28 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | HanElectricity CPG151101S11-16 (MX hot-swap socket) KEY8 | SW_MX_Hotswap_Kailh_1u_NorthLED | K8 |
| 4 | Wurth 9774030243 M2x3 standoff | Mounting_Wuerth_WA-SMSI-M2_H3mm_9774030243 | ST1, ST2, ST3, ST4 |
| 1 | C&K PCM12SMTR POWER | SW_SPDT_PCM12 | SW1 |
| 1 | C&K PTS810SJK250SMTRLFS RESET | SW_SPST_PTS810 | SW2 |
| 1 | Alps SKRTLAE010 L1 | SW_Push_1P1T-MP_NO_Horizontal_Alps_SKRTLAE010 | SW3 |
| 1 | Alps SKRTLAE010 L2 | SW_Push_1P1T-MP_NO_Horizontal_Alps_SKRTLAE010 | SW4 |
| 1 | Alps SKRTLAE010 SYSTEM | SW_Push_1P1T-MP_NO_Horizontal_Alps_SKRTLAE010 | SW5 |
| 8 | OPSCO SK6812MINI-E SK6812MINI-E | LED_SK6812MINI-E_3.2x2.8mm_P1.5mm_ReverseMount | D1, D2, D3, D4, D5, D6, D7, D8 |
| 1 | CL10A105KB8NNNC (50 V X5R) 1u 25V | C_0603_1608Metric | C1 |
| 4 | CL10A106KP8NNNC (10 V X5R) 10u 10V | C_0603_1608Metric | C2, C9, C10, C26 |
| 2 | CL10A475KO8NNNC (16 V X5R) 4.7u 10V | C_0603_1608Metric | C3, C12 |
| 13 | CC0603KRX7R9BB104 (50 V X7R) 100n | C_0603_1608Metric | C4, C11, C15, C16, C17, C18, C19, C20 +5 |
| 2 | CL10A105KB8NNNC (50 V X5R) 1u 10V | C_0603_1608Metric | C5, C7 |
| 1 | CL10A225KO8NNNC (16 V X5R) 2.2u 10V | C_0603_1608Metric | C6 |
| 1 | CL10B102KB8NNNC (50 V X7R) 1n | C_0603_1608Metric | C8 |
| 2 | CL10C120JB8NNNC (50 V C0G) 12p | C_0603_1608Metric | C13, C14 |
| 1 | CL31A107MQHNNNE (1206, 6.3 V X5R) 100u 6.3V | C_1206_3216Metric | C25 |
| 2 | UNI-ROYAL 0603WAF5101T5E 5.1k | R_0603_1608Metric | R1, R2 |
| 1 | UNI-ROYAL 0603WAF1002T5E 10k | R_0603_1608Metric | R3 |
| 1 | UNI-ROYAL 0603WAF1801T5E 1.8k | R_0603_1608Metric | R4 |
| 1 | UNI-ROYAL 0603WAF1501T5E 1.5k | R_0603_1608Metric | R5 |
| 2 | DNP | R_0603_1608Metric | R6, R7 |
| 3 | UNI-ROYAL 0603WAF1003T5E 100k | R_0603_1608Metric | R8, R9, R13 |
| 3 | UNI-ROYAL 0603WAF1004T5E 1M | R_0603_1608Metric | R10, R11, R12 |
| 3 | UNI-ROYAL 0603WAF0000T5E 0R | R_0603_1608Metric | R14, R15, R20 |
| 1 | UNI-ROYAL 0603WAF330JT5E 33 | R_0603_1608Metric | R16 |
| 1 | UNI-ROYAL 0603WAF3300T5E 330 | R_0603_1608Metric | R17 |
| 2 | UNI-ROYAL 0603WAF4701T5E 4.7k | R_0603_1608Metric | R18, R19 |
Deck-8 design files
The KiCad project lives in the varaddorle007/deck-8 repository on GitHub; these links point at the commit this page was built from.
Deck-8: common questions
What microcontroller does the Deck-8 use?
The Deck-8 is built around the Raytac MDBT50Q-1MV2, from the Nordic nRF family.
How big is the Deck-8 PCB?
The Deck-8 measures 92.8 × 76 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Deck-8?
87 components, from 48 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Deck-8 design files?
From the varaddorle007/deck-8 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Deck-8 design in my own project?
Yes, under the terms of its MIT license, which varaddorle007 chose for the repository.
Can I test firmware for the Deck-8 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.
Similar boards
Nordic nRF
Keyboard
byrantech
262.5 × 109.6 mm206 parts2LMIT4.3kNordic nRF
TOTEM
GEIGEIGEIST
258.8 × 94.4 mm85 parts2LCERN-OHL-P-2.02.0kNordic nRF
Pixl.js
solosky
40 × 23 mm45 parts4LGPL-2.01.4kNordic nRF
Board hl15-latest
dennisss
61 × 37 mm14 parts2LApache-2.0381Nordic nRF
Management
dennisss
101 × 31.5 mm50 parts2LApache-2.0381Nordic nRF
Board
dennisss
363 × 128 mm420 parts4LApache-2.0381