Smart-Home-Automation
varniya07·Smart-Home-Automation-PCB·KiCad_Project/smart home automation.kicad_pcb
About the Smart-Home-Automation PCB
Smart-Home-Automation is an open source ESP32 PCB design by varniya07, published on GitHub. It is a 2-layer board measuring 79.1 × 71.8 mm, with 28 components from 17 distinct parts.
Its main chip is the ESP32-WROOM-32, from the ESP32 family. Other key parts include the PC817 and AMS1117-3.3. By type, the board carries 8 resistors, 4 ICs, 4 diodes, 3 connectors, 2 transistors and 2 relays.
It belongs with the iot & wireless designs in this gallery.
From the project
ESP32-based Smart Home Automation PCB designed using KiCad.
This project is a custom-designed ESP32-based Smart Home Automation PCB created using KiCad 9.
The board integrates an ESP32 microcontroller with an AC-to-DC power supply, voltage regulation, relay driver circuit, UART programming interface, and user controls for reliable IoT-based home automation.
- ESP32-WROOM-32 Microcontroller - HLK-PM03 AC to DC Converter - AMS1117-3.3V Voltage Regulator - Relay Driver Circuit - Boot & Reset Buttons - UART Programming Header - Two-Layer PCB - Compact Board Layout - Mounting Holes

Main components on the Smart-Home-Automation
Smart-Home-Automation bill of materials (BOM)
28 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-WROOM-32 | ESP32-WROOM-32 | U1 |
| 2 | PC817 | DIP-4_W7.62mm | U2, U3 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U4 |
| 2 | S8050 | TO-92_Inline | Q1, Q2 |
| 1 | Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | Screw_Terminal_01x04 | TerminalBlock_bornier-4_P5.08mm | J2 |
| 1 | Screw_Terminal_01x03 | TerminalBlock_bornier-3_P5.08mm | J3 |
| 1 | RAYEX-L90AS | Relay_SPST_RAYEX-L90AS | K1 |
| 1 | PR13-5V-450-1C | RELAY_PR13-5V-450-1C | K2 |
| 1 | HLK-PM01 | Converter_ACDC_Hi-Link_HLK-PMxx | PS1 |
| 2 | SW_Push | SW_PUSH_6mm | SW1, SW2 |
| 2 | LED | LED_0805_2012Metric | D1, D4 |
| 2 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D2, D3 |
| 1 | 10uF | C_0805_2012Metric | C1 |
| 1 | 22uF | C_0805_2012Metric | C2 |
| 6 | 1K | R_0805_2012Metric | R1, R2, R3, R4, R5, R6 |
| 2 | 10K | R_0805_2012Metric | R7, R8 |
Smart-Home-Automation design files
The KiCad project lives in the varniya07/Smart-Home-Automation-PCB repository on GitHub; these links point at the commit this page was built from.
Smart-Home-Automation: common questions
What microcontroller does the Smart-Home-Automation use?
The Smart-Home-Automation is built around the ESP32-WROOM-32, from the ESP32 family.
How big is the Smart-Home-Automation PCB?
The Smart-Home-Automation measures 79.1 × 71.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Smart-Home-Automation?
28 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the Smart-Home-Automation design files?
From the varniya07/Smart-Home-Automation-PCB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Smart-Home-Automation design in my own project?
The repository has no license, so all rights stay with varniya07. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Smart-Home-Automation without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k