MPU6050.kicad pcbFINAL
varolkan·Yens-Yens-internship-assignment·Final PCB Files/MPU6050.kicad_pcbFINAL.kicad_pcb
About the MPU6050.kicad pcbFINAL PCB
MPU6050.kicad pcbFINAL is an open source RP2040/RP2350 PCB design by varolkan, published on GitHub under the MIT license. It is a 2-layer board measuring 40.1 × 64.4 mm, with 9 components from 7 distinct parts.
Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. Other key parts include the MPU-6050. By type, the board carries 4 capacitors, 2 resistors, 1 IC, 1 module and 1 connector.
It belongs with the sensors, wearables and displays & leds designs in this gallery.
From the project
Raspberry Pi Pico Dual-Core PCB Hat with MPU-6050 and WS2812B LED Strip
Raspberry Pi Pico Dual-Core PCB Hat with MPU-6050 and WS2812B LED Strip
Motion-Driven Light is a dual-core embedded system for the Raspberry Pi Pico featuring:
- Real-time motion sensing via MPU-6050 6-axis accelerometer/gyroscope module - Physics-based water flow LED animation with smooth gradient falloff on WS2812B addressable RGB LED strip - Custom PCB Hat design with complete KiCad project files and production-ready Gerber manufacturing outputs - Hardware-agnostic robustness: Automatic simulation mode when sensor is not detected, enabling code testing without physical hardware -…
Main components on the MPU6050.kicad pcbFINAL
MPU6050.kicad pcbFINAL bill of materials (BOM)
9 components, 7 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MPU-6050 | InvenSense_QFN-24_4x4mm_P0.5mm | U1 |
| 1 | RaspberryPi_Pico | RaspberryPi_Pico_Common_Unspecified | A1 |
| 1 | Conn_01x03_Pin | FanPinHeader_1x03_P2.54mm_Vertical | J2 |
| 2 | 0.1µF | C_0402_1005Metric | C1, C2 |
| 1 | 2.2nF | C_0402_1005Metric | C3 |
| 1 | 10nF | C_0402_1005Metric | C4 |
| 2 | 4.7k | R_0402_1005Metric | R1, R2 |
MPU6050.kicad pcbFINAL design files
The KiCad project lives in the varolkan/Yens-Yens-internship-assignment repository on GitHub; these links point at the commit this page was built from.
MPU6050.kicad pcbFINAL: common questions
What microcontroller does the MPU6050.kicad pcbFINAL use?
The MPU6050.kicad pcbFINAL is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.
How big is the MPU6050.kicad pcbFINAL PCB?
The MPU6050.kicad pcbFINAL measures 40.1 × 64.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MPU6050.kicad pcbFINAL?
9 components, from 7 distinct parts. The full bill of materials is listed on this page.
Where can I download the MPU6050.kicad pcbFINAL design files?
From the varolkan/Yens-Yens-internship-assignment repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the MPU6050.kicad pcbFINAL design in my own project?
Yes, under the terms of its MIT license, which varolkan chose for the repository.
Can I test firmware for the MPU6050.kicad pcbFINAL without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
More boards in Yens-Yens-internship-assignment
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k