Pcb flight controller
varun040705·pcb-flight-controller
About the Pcb flight controller
Pcb flight controller is an open source RP2040/RP2350 PCB design by varun040705, published on GitHub. It is a 2-layer board measuring 50 × 50.5 mm, with 65 components from 27 distinct parts.
Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the BMI160, W25Q128JVS and AMS1117. By type, the board carries 21 capacitors, 16 resistors, 13 connectors, 5 ICs, 4 test points and 3 diodes.
It belongs with the robotics & motion, sensors and power & battery designs in this gallery.
From the project
Designed a custom flight controller PCB using KiCad, integrating microcontroller, sensors, and power management circuits for drone applications. Demonstrates embedded systems and hardware design expertise.
Designed a custom flight controller PCB using KiCad, integrating microcontroller, sensors, and power management circuits for drone applications. Demonstrates embedded systems and hardware design expertise.
This project involves the complete design and development of a custom flight controller PCB for drone/UAV applications. The flight controller serves as the "brain" of the aircraft, managing stabilization, navigation, and control of the drone through integrated sensors and actuators.
Main components on the Pcb flight controller
Pcb flight controller bill of materials (BOM)
65 components, 27 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RP2040 | QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U1 |
| 1 | BMI160 | Bosch_LGA-14_3x2.5mm_P0.5mm | U2 |
| 1 | W25Q128JVS | SOIC-8_5.3x5.3mm_P1.27mm | U3 |
| 2 | AMS1117 | SOT-223-3_TabPin2 | U4, U5 |
| 1 | Q_PMOS_GSD | SOT-23 | Q1 |
| 1 | Crystal_GND24 | Crystal_SMD_0603-4Pin_6.0x3.5mm | Y1 |
| 1 | USB_C_Receptacle_USB2.0_14P | USB_C_Receptacle_GCT_USB4085 | J1 |
| 4 | ~ | PinHeader_1x04_P1.00mm_Vertical | J2, J3, J4, J5 |
| 6 | Conn_01x04_Pin | PinHeader_1x04_P1.00mm_Vertical | J6, J7, J8, J9, J10, J11 |
| 1 | Conn_01x02_Pin | PinHeader_1x02_P1.00mm_Vertical | J12 |
| 1 | ~ | Stocko_MKS_1653-6-0-303_1x3_P2.50mm_Vertical | J13 |
| 1 | CK_KMS2xxGP | SW_SPST_CK_KMS2xxGP | SW1 |
| 4 | TestPoint | TestPoint_Keystone_5015_Micro_Mini | TP1, TP2, TP3, TP4 |
| 1 | LED_BARG | LED_RGB_5050-6 | D1 |
| 2 | D_Schottky_Dual_CommonAnode_AKK_Split | D_3220_8050Metric | D2, D3 |
| 13 | 100nF | C_0201_0603Metric | C1, C2, C3, C7, C8, C9, C10, C11 +5 |
| 1 | 10nF | C_0201_0603Metric | C4 |
| 1 | 100nF | C_01005_0402Metric | C5 |
| 2 | 1uF | C_01005_0402Metric | C6, C16 |
| 4 | 10uF | C_0805_2012Metric | C18, C19, C20, C21 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 5.11K | R_01005_0402Metric | R1, R2 |
| 5 | 10K | R_01005_0402Metric | R3, R10, R11, R14, R16 |
| 2 | 27.4R | R_01005_0402Metric | R4, R5 |
| 2 | 1K | R_01005_0402Metric | R6, R15 |
| 3 | 330R | R_0201_0603Metric | R7, R8, R9 |
| 1 | 20K | R_01005_0402Metric | R12 |
| 1 | 5.6K | R_01005_0402Metric | R13 |
Pcb flight controller design files
The KiCad project lives in the varun040705/pcb-flight-controller repository on GitHub; these links point at the commit this page was built from.
- Layoutpro5.kicad_pcb
- Schematicpro5.kicad_sch
Pcb flight controller: common questions
What microcontroller does the Pcb flight controller use?
The Pcb flight controller is built around the RP2040, from the RP2040/RP2350 family.
How big is the Pcb flight controller?
The Pcb flight controller measures 50 × 50.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pcb flight controller?
65 components, from 27 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pcb flight controller design files?
From the varun040705/pcb-flight-controller repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Pcb flight controller design in my own project?
The repository has no license, so all rights stay with varun040705. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Pcb flight controller without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k