Pen plotter
vcampos4545·pen-plotter·hardware/pcb/PenPlotter.kicad_sch
About the Pen plotter PCB
Pen plotter is an open source ESP32 PCB design by vcampos4545, published on GitHub. It is a board, with 8 components from 5 distinct parts.
Its main chip is the ESP32-WROOM-32, from the ESP32 family. Other key parts include the TMC2209-LA. By type, the board carries 3 ICs, 3 modules and 2 capacitors.
From the project
KiCad project for the controller board: open PenPlotter.kicadpro` in KiCad. KiCad files are plain text and diff well, so commit them as-is.
KiCad project for the controller board: open PenPlotter.kicadpro` in KiCad. KiCad files are plain text and diff well, so commit them as-is.
- .kicadpro, .kicadsch, .kicadpcb - Project-local libraries: .kicadsym, .pretty/ footprint folders (.kicadmod), sym-lib-table, fp-lib-table` - 3D models the board references, if they are not in the stock KiCad libraries
Do not commit (already in .gitignore): .kicadprl (per-user view state), -backups/, fp-info-cache, autosave-, #autosavedfiles#, .lck, .history/` (KiCad local history).
Main components on the Pen plotter
Pen plotter bill of materials (BOM)
8 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-WROOM-32 | ESP32-WROOM-32 | U1 |
| 2 | TMC2209-LA | VQFN-28-1EP_5x5mm_P0.5mm_EP3.7x3.7mm_ThermalVias | U2, U3 |
| 2 | Stepper_Motor_bipolar | M1, M2 | |
| 1 | Motor_Servo | M3 | |
| 2 | 100uF | C1, C2 |
Pen plotter design files
The KiCad project lives in the vcampos4545/pen-plotter repository on GitHub; these links point at the commit this page was built from.
- Schematichardware/pcb/PenPlotter.kicad_sch
Pen plotter: common questions
What microcontroller does the Pen plotter use?
The Pen plotter is built around the ESP32-WROOM-32, from the ESP32 family.
How many components are on the Pen plotter?
8 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pen plotter design files?
From the vcampos4545/pen-plotter repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the Pen plotter design in my own project?
The repository has no license, so all rights stay with vcampos4545. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Pen plotter without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k